LK Automation Limited
Home >> Price >> YASKAWA >> SGMGV-09ADA2B YASKAWA SGMGV-09ADA2B
Brand sort

SGMGV-09ADA2B YASKAWA SGMGV-09ADA2B

Brand: YASKAWA
Country:
Name: Rotary servo motor
Price: 0
YASKAWA SGMGV-09ADA2B
Full closed loop module.
Maximum applicable motor capacity: 0.4kw.
Power supply voltage: single phase AC100V.
Interface: MECHATROLINK- III communication command type (rotary servo motor).
Design sequence: B.
Hardware specifications: paint.
Matching (software): no matching (standard).
Matching (parameters): no matching (standard) YASKAWA SGMGV-09ADA2B.
Optional modules: full closed loop module.
Full closed loop control system is used to control the rotating servo motor SGMGV-09ADA2B
Please install the servo unit.
Using the position feedback signal which is output by the external encoder (linear grating ruler) installed on the side of the machine to realize the high precision and high response YASKAWA SGMGV-09ADA2B.
External encoder capable of corresponding high resolution (linear grating) . Large capacity SGMVV type servo motor.
Rated output: 37KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 1500r\/min.
The main mechanical structure: support mounting type, straight shaft (no keyway and screw).
Optional parts: with hold brake (DC24V), with oil seal YASKAWA SGMGV-09ADA2B.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties .
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenSigma -V series servo motor SGMGV.
Rated output: 15kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit Delta (standard).
Design sequence: Standard (bolt for silver).
Shaft end: straight shaft, without keyway (standard).
Optional: with hold brake (DC24V).
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: fflange type .
Heatt resistance grade: F SGMGV-09ADA2B.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% ((not dew) SGMGV-09ADA2B.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
SGMGV-09ADA2B Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMGV-09ADA2B&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Rotary servo motor
SGMGV-20DDC6D
Yaskawa Rotary servo motor SGMGV-20DDC6D
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-1EADC2C
Yaskawa Rotary servo motor SGMGV-1EADC2C
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-20DDC61
Yaskawa Rotary servo motor SGMGV-20DDC61
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-30D3C2B
Yaskawa Rotary servo motor SGMGV-30D3C2B
Sigma -V series servo motor SGMGV. Rated