LK Automation Limited
Home >> Price >> YASKAWA >> YASKAWA SGMGV-55A3A2B Door Switches SGMGV-55A3A2B
Brand sort

YASKAWA SGMGV-55A3A2B Door Switches SGMGV-55A3A2B

Brand: YASKAWA
Country:
Name: Rotary servo motor
Price: 0
YASKAWA SGMGV-55A3A2B
Sigma -V series servo motor SGMAV.
Rated output: 0.2KW (200W).
Power supply voltage: AC200V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft, without keyway (standard).
Optional: with oil seal.
Super power rate.
Small capacity.
Ultra low inertia
Instantaneous maximum torque (rating 300%) YASKAWA SGMGV-55A3A2B.
Equipped with a high resolution serial encoder (20 bit).
Max speed up to 6000r\/min SGMGV-55A3A2B
Variety is complete (50W ~ 1.0kw, with hold brake).
Use example:
Semiconductor manufacturing equipment,
Placement machine,
Punch printed circuit board,
Robot,
Handling machinery,
Food processing machinery YASKAWA SGMGV-55A3A2B.
Rating and specifications:
Rated time: continuous.
Vibration level: V15 .
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: B.
Insulation withstand voltage: AC1500V1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part) YASKAWA SGMGV-55A3A2B.
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection .
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationLarge capacity SGMVV type servo motor.
Rated output: 22KW.
Voltage: three phase AC200V.
Serial encoder: 20 bit delta.
Rated speed: 1500r\/min.
The main mechanical structure: flange type, straight shaft (without keyway and screw).
Optional parts: do not buy pieces.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenServo motor type SGMPH (speed: 3000r\/min).
Power: 0.1kw.
Power supply voltage: single phase AC100V.
Serial encoder: 16 bit absolute value.
Design sequence: Waterproof standard IP67.
Shaft end: straight shaft with screw.
Optional parts: with DC24V brake.
Partial flat series: the need to install the servo motor in a small space.
Flexible user system.
For you to build the best system to enrich the product line to support you.
Products with single phase 200V, single phase 1000VV, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer SGMGV-55A3A2B.
And then, because of its compliance with international standards, in the world can be assured that the use of.
Smooth running, there is a veeery seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operated
SGMGV-55A3A2B Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMGV-55A3A2B&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Rotary servo motor
SGMGV-03A3C61
Yaskawa Rotary servo motor SGMGV-03A3C61
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-05D3C2E
Yaskawa Rotary servo motor SGMGV-05D3C2E
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-05D3C6D
Yaskawa Rotary servo motor SGMGV-05D3C6D
Sigma -V series servo motor SGMGV. Rated
Yaskawa
servo motor
SGMSV-15A3A2B
Yaskawa servo motor SGMSV-15A3A2B
Sigma -V series servo motor SGMSV. Rated