44507-1161 MA-11AP11C10 OMRON 44507-1161 MA-11AP11C10

Time specification: Instantaneous type.
Current setting range: 20 to 65 A.
Operating voltage: 400/440 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON 44507-1161 MA-11AP11C10.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase 44507-1161 MA-11AP11C10
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation OMRON 44507-1161 MA-11AP11C10.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions . Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Name: On-site Flexible Rod Switch (integrated switch only) OMRON 44507-1161 MA-11AP11C10.
Mounting method: Front mounting.
Easy on-site input on-the-move.
Incorporation of plastic rod actuator makes the Switch easy on hands .
One-way operation:
Equipped with stopper so that operation is only possible from one direction.
Distinctive yellow used for the body.
Three different types of mounting are available.
Models with emergency-stop switch are available to suit the application. Type: With cable.
Connector: Connectors on both cable ends.
DC: Cable length L, 1 m; Minimum order, 5.
Water- and Environment-resistive FA.
Connectors Save Wiring and Maintenance Effort.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating.
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime.
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202. Appearance: Round/Projection type LED lighting,
(without Voltage Reduction Unit)A22L-T.
Output: SPST-NC + SPST-NC.
Lighting: LED.
Operating voltage: 6 VAC/VDC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the SSwitch Unit 44507-1161 MA-11AP11C10.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounteed using either open-type (fork-type) or closed-type 44507-1161 MA-11AP11C10.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).
44507-1161 MA-11AP11C10 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=44507-1161 MA-11AP11C10&select=5