61F-GP-NT AC100 OMRON 61F-GP-NT AC100

I/O classification: Input and output.
Internal I/O circuit common: NPN (input: + common; output – common).
I/O points: 32.
I/O connection method: MIL connector.
Rated voltage for communications power supply: 24 VDC.
Rated voltage for I/O power supply: 24 VDC.
Applicable relay: G3DZ-2R6PL.
Subminiature 32-point Remote Terminal with Connectors OMRON 61F-GP-NT AC100.
Compact dimensions: 35 × 60 × 80 (W × D × H).
Long-distance and high-speed communications modes available 61F-GP-NT AC100
Downsizing enabled with 32-point MIL connector for I/O connection. Terminal (wire connection): Push-In Plus Terminal.
Applicable output load: AC load.
Zero cross function: No OMRON 61F-GP-NT AC100.
Rated input voltage: AC 110V.
Global standard size,
low profile slim I/O relay with width 6 . 2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals OMRON 61F-GP-NT AC100. ).
No screw loosening means maintenance-free application,
realizing high reliability .
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. Size: 96 x 96mm.
Category: power AC100 ~ 240V with.
Shell color: black.
Control output 1: position ratio with relay output.
Control output 2: position ratio with relay output.
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
Heater break, SSR fault detection function: single phase or three phase heater detection function.
Event entry point: 2.
Transfer output: -.
Remote SP:4 to 20mA input.
Communication: RS-232C.
New program type.
A new type of liquid crystal with high performance cost ratio is adopted in the 256 paragraph,
Visual angle, contrast can be improved.
Can be set up to 8 procedures (mode) x 32 (step) procedure.
High resolution 5 bit display / can display 0.01 degrees C.
High speed sampling period 60ms.
All models complete a variety of (to the thermocouple /Pt/ analog input switching), 1 machines to support a variety of sensors.
Also supports remote SP.
Add PV/SV state display function, to see the state of the thermostat
(automatic / manual, RUN/RESET, alarm), interactive display PV/SV.
Through the support software (VVer .4.3 CX-Thermo) makes the process of setting management becomes very
Simple use of simple computing functions (AND/OR logic and delay) to set the implementation of flexible contact output 61F-GP-NT AC100.
Through the infrared port can be carried out from the frronnt of the communication 61F-GP-NT AC100.
The control output ON/OFF times counting function can predict the fault of the internal relay of the temperature controller.
61F-GP-NT AC100 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=61F-GP-NT AC100&select=5