70190-1748 MC47SR-20-225-LCM11 OMRON 70190-1748 MC47SR-20-225-LCM11

Size: M8, Non-shielded.
Sensing distance: 4.0 mm.
Connection: Pre-wired.
Body material: Stainless steel.
Thread length (overall length): 27 (40).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor OMRON 70190-1748 MC47SR-20-225-LCM11.
Problems such as the collision of workpieces are eliminated 70190-1748 MC47SR-20-225-LCM11
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Optical fiber division.
Fiber length: 1 meters OMRON 70190-1748 MC47SR-20-225-LCM11.
Allowable bending radius: 30mm above. Time specification: Instantaneous type.
Current setting range: 20 to 65 A .
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase OMRON 70190-1748 MC47SR-20-225-LCM11.
Circuit and output relay operation can be checked by just operat,
ing the test button .
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Cable: PUR.
Cable core number (core): 4.
Cable outside diameter: 4.7mm.
Cable outlet direction: L type.
Cable length L:2m.
Small round type waterproof connector.
Small waterproof connector can meet the requirement of protection IP67.
Is the ideal choice for a variety of FA and QA applications.
As with connector cable products, so no need for wiring operation.
Operation/resetting system: Time-limit operation/self-resetting.
Time-limit contact: 4PDT.
Time ranges: 0.04 s to 3 h.
Supply voltage: 100 to 120, 200 to 230 VAC (50/60 Hz); 12, 24, 48, 100 to 110 VDC.
Mounting: Surface/DIN-track mounting (with socket).
Miniature Timer Coompatible with the MY .
Relay.
ULL listed when used with a Push-In Plus Terminal Block Socket 70190-1748 MC47SR-20-225-LCM11.
Conforms to CSA, CE Marking, CCC and LR.
Black design with power supply terminals on top and contact output,
terminals on bottom.
Large transparent ttimme setting knob facilitates time setting 70190-1748 MC47SR-20-225-LCM11.
A flat-blade and Phillips screwdriver can also be used for time setting.
Semi-multi power supply voltage.
70190-1748 MC47SR-20-225-LCM11 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=70190-1748 MC47SR-20-225-LCM11&select=5