MITSUBISHI AJ65BT-G4-S3

Motor series: low inertia, medium capacity.
Rated output power: 45.0kw.
Rated speed: 1500rpm.
With the brake: without.
Voltage: 400V level.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor AJ65BT-G4-S3
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines). "2 axes, SSCNET III type.
2 axis linear interpolation MITSUBISHI .
2 axis arc interpolation.
Control unit: mm, inch, degree, pulse.
Location data: 600 data / axis .
40 pin connector.
Through the SSCNET III cable connection to save wiring, the distance between the station up to 50m.
Absolute position system for determining the origin position is supported by the return data set operation.
In addition, the limit switch of the upper limit, the lower limit switch and the near point block signal input can be directly connected to the servo amplifier,
Thus greatly reducing the wiring requirements MITSUBISHI .
Easy to achieve high speed, high precision positioning control.
Support for multiple types of positioning control,
Including 2 ~ 4 axis 2 axis linear interpolation, circular interpolation, speed control and speed / position control, path switching control, constant speed control etc..
In addition, can use the "Configurator-QP GX" and other software,
Easy to set, monitor and debug. "CPU connection program input device.
ACPU use. RS-422 1 channel, RS-422/485 1 channel.
Transfer speed: 0.3-19.2kbps.
Equipment layer / field bus CC-Link device layer is the PLC and other control devices and sensors and drive devices connected to the field network,
Network for the lowest layer of the whole network system.
Using CC-Link field bus connection, the number of wiring is greatly reduced,
Improve the maintainability of the system.
And, not just the amount of data ON/OFF and other switches,
Can also be connected to the ID system, bar code reader, inverter, man--machine interface and other intelligent devices,
From the completion of a variety of data communication, the management of the terminal production information can be realized,
On the centralized management of the state oof tthe machine movement,
Make maintenance work efficiency also greatly improved MITSUBISHI AJ65BT-G4-S3 MITSUBISHI AJ65BT-G4-S3.
Q series PLC in the use of CC-Link function better,
And easier to use.
AJ65BT-G4-S3 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=AJ65BT-G4-S3&select=5