MITSUBISHI GT15-QC100B

Max input / output points: 14 points.
Power supply voltage: DC24V.
Input points: 8 points.
Output points: 6 points.
Output type: relay.
Power consumption (W): 32.
Weight (kg):0.4.
Size (WxHxD) mm:90x90x75.
FX1N series is a very powerful micro PLC, can be extended to up to 128 I/O points,
And can increase the special function module or the expansion board MITSUBISHI .
Communication and data link function options make FX1N in the volume, communication and special function modules and other important applications is very perfect GT15-QC100B
A PLC unit can output 2 100KHz pulses at the same time,
PLC is equipped with 7 special positioning instructions,
Including zero return, absolute position readout, absolute or relative drive, and special pulse output control MITSUBISHI . NTSC/PAL output system.
Applicable model: A985GOT-V. MR-J2M multi axis servo amplifier drive unit.
Rated output: 0.2kw.
AC servo control system includes AC servo system based on asynchronous motor and AC servo system based on synchronous motor.
Besides the advantages of good stability, good rapidity and high accuracy, the advantages of MITSUBISHI .
Its performance indicators can be measured from the speed range, positioning accuracy, the accuracy of stability, dynamic response and operational stability and so on . "Maximum control axis: 16 axis.
Connection mode with servo amplifier: SSCNET III /H connection type.
The maximum distance between the drive units: 100m.
Operation cycle: 0.88ms, 1.77ms.
Interpolation function: linear interpolation (maximum 4 axis), 2 axis arc interpolation.
Color signal: 4 points.
Color detecting set: 16 set.
Even the long distance wiring can be flexible.
The use of fiber optic cable, with high speed, high performance, high reliability of the servo system controller network.
In addition to the traditional positioning control, but also to support speed / torque control and synchronous control.
Use simple movement module setup tool",
Can easily perform positioning settings, monitoring and debugging, etc..
In addition, the data can be collected and displayed synchronously with the motion controller.
SSCNET III /H connection to save the wiring, the maximum distance between the station up to 100m,
Absolute position system can be easily supported.
The upper limit limit switch, the lower limit switch and the near point block signal are input by the serrvo amplifier,
Thus greatlyy reducing wiring MITSUBISHI GT15-QC100B.
In addition to positioning control and speed control, but also to perform synchronization control, cam control, torque control, touch pressure control, etc..
Positioning module (QD75MH) of the project annd the sequence of the previous model is highly compatible with the old model,
The project can be easily applied to the simple motion module (QD77MS) MITSUBISHI GT15-QC100B. "
GT15-QC100B Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=GT15-QC100B&select=5