MITSUBISHI HC-SFS102BG1 1/11

Input voltage range: DC24V.
Output voltage: DC5V.
Output current: 2.5A.
I/O points is an important indicator of PLC.
Reasonable selection of I/O points can not only satisfy the control requirements of the system,
And the total investment of the system is the lowest.
The input and output points and types of PLC should be determined according to the analog quantity and switch quantity of the controlled object,
Generally an input / output element to take up an input / output point HC-SFS102BG1 1/11
Taking into account the future adjustment and expansion,
In general should be estimated on the total number of points plus the amount of spare 20%~30% MITSUBISHI .
The following describes the centralized control system I/O points of the estimate .
Relay output interface circuit of PLC
Working process: when the internal circuit output digital signal 1,
There is a current flowing through, the relay coil has a current, and then the normally open contact is closed,
Provide load current and voltage.
When the internal circuit outputs a digital signal 0, there is no current flowing through it,
The relay coil does not have a current, and the normally open contact is broken off,
A current or voltage that is disconnected from the load MITSUBISHI .
It is through the output interface circuit to the internal digital circuit into a signal to make the load action or not action. Motor series: medium inertia, medium capacity.
Using a serial absolute / incremental encoder.
Rated output power: 0.85kw.
Rated speed: 1000rpm.
With a brake band.
Shaft end: straight shaft.
The structure of the AC servo motor stator is basically similar to the capacitor split phase single-phase induction motor.
The stator is provided with two positions of 90 degrees of mutual difference of the winding, one is the excitation winding Rf, it is always connected to the AC voltage Uf;
The other is to control the wiinding L, which is connected to tthe control signal voltage Uc MITSUBISHI HC-SFS102BG1 1/11.
So the AC servo motor, also known as the two servo motor. Use: this option can be selected from the open collector output can output 2 analog signal from the transducer output signal inn tthe standard 6 digital signal MITSUBISHI HC-SFS102BG1 1/11.
Applicable frequency converter: FR-A700, FR-F700, FR-E700. "Cable length 1.2 meters.
Extended substrate for connection.
HC-SFS102BG1 1/11 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=HC-SFS102BG1 1/11&select=5