MITSUBISHI A1SJ71T32-S3 A1SJ71T32-S3

Purpose: MR-JE-B.Display: 16 characters x 4 lines.
Can monitor, change the value of software components.
Can also be simple to operate, change the value.
Equipped with a button operation can be used (operator certification function) and control through the PLC control function,
Can be used with the function expansion board MITSUBISHI A1SJ71T32-S3.
Can be installed directly to the FX3GA, FX3G, FX3GE, no wiring. Drive: MR-H_ACN series CC-LINK features A1SJ71T32-S3
Rated output: 22KW.
The test system is composed of two parts, namely, the servo driver, the motor system and the host computer.
The host computer sends the speed command signal to the servo driver,
Servo drives start to run in accordance with the instructions MITSUBISHI A1SJ71T32-S3.
In the course of operation, the running data of the servo system is collected by the host computer and the data acquisition circuit,
And carries on the preservation, the analysis and the display to the data . Because the motor is not loaded in this test system,
So compared with the previous two kinds of testing systems, the system has a relatively small volume,
And the measurement and control circuit of the system is relatively simple,
But it also makes the system can not simulate the actual operation of the servo drive MITSUBISHI A1SJ71T32-S3.
Usually, such testing system is only used to test the rotational speed and angular displacement of the tested system under no-load condition,
And can not carry on the comprehensive and accurate test to the servo drive. Storage capacity: 64MB.
Applicable models: A985 (-V) /A975/A970/A960GOT (-B). Input: 2 channels.
500/200/100/10kpps.
Counter input signal: DC5/12/24V.
External input: DC5/12/24V.
Uniform output: Transistor (drain type).
DC12/24V.
0.5A/ point.
2A common end.
40 pin connector. Drive: MR-H_AN series.
Rated output: 22KW.
Universal AC servo.
Servo driver (drives servo) also known as the "servo controller", "servo amplifier",
Is a kind of controller used to control the servo motor. Its function is similar to that of the frequency converter,
Belongs to a part of the servo system, which is mainly used in high precision positioning system.
In general, the servo motor is controlled by position, speed and torque in three ways,
To achieve high precision positioning of the transmission system, the current transmission technology is the high-end products.
Servo drive is an important part of modern motion control,
Is widely used in industrial robots and CNC machining centers and other automation equipment.
In particular, it has becomme a hot researchh topic in the field of servo drives for the control of AC permanent magnet synchronous motor A1SJ71T32-S3.
Current, speed and position 3 closed loop control algorithm based on vector control is widely used in AC servo drive system.
The speed cllossed-loop design of the algorithm is reasonable or not, for the entire servo control system,
Especially the speed control performance plays a key role A1SJ71T32-S3.
A1SJ71T32-S3 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A1SJ71T32-S3&select=5