OMRON 70174-1147 SSLE11(Z) 70174-1147 SSLE11(Z)

Setting range: 0.1 to 1 A AC/DC, 0.5 to 5 A AC/DC.
Power supply voltage: 24 VAC/DC.
Ideal for Current Monitoring for.
Industrial Facilities and Equipment.
Monitor for overcurrents and undercurrents simultaneously.
Separate settings and outputs supported for overcurrents and undercurrents.
Use commercially available CTs (CT current on secondary,
side: 0 to 1 A or 0 to 5 A) OMRON 70174-1147 SSLE11(Z).
Manual resetting and automatically resetting supported by one Relay 70174-1147 SSLE11(Z)
Startup lock and operating time can be set separately.
Two sets of SPDT output contacts, 5 A at 250 VAC (resistive load).
Output status can be monitored using LED indicator OMRON 70174-1147 SSLE11(Z).
Inputs are isolated from the power supply. Model: C200H-DA002.
Input points: 4 .
Voltage input: –10 to 10V.
Current input: 4 to 20 mA.Ratings: 1 A at 30 VDC.
LED indicator: With indicator.
Actuator: Roller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches OMRON 70174-1147 SSLE11(Z).
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection .
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating).
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Actuator: Pin plunger.
Subminiature Models.
Capable of Large-capacity.
load of 7A.
Snap-action switch allows large-capacity.
switching (7A at 250 VAC) in spite of its small size.
Particularly suitable as control switches for,
applications where there are restrictions on,
installation space and weight. Type: Standard Models.
Terminals: Plug-in.
Contact form: DPDT.
Internal connections (See note 3.): Standard.
With mechanical indicator and lockable test button.
Coil ratings: AC/DC.
NNew Super MK Relays .
Moodels with Latching Lever Added to the Series 70174-1147 SSLE11(Z).
Same mounting and internal wiring as the previous Super.
MK Relays.
Built-in mechanical indicator enables checking contact operation.
Two modes can be used to check circuits foor models with latching lever 70174-1147 SSLE11(Z).
Nameplate provided on models with latching lever.
All materials are RoHS compliant.
UL and IEC (TÜV) certification.
70174-1147 SSLE11(Z) Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=70174-1147 SSLE11(Z)&select=5