Sale 40259-1090 MP21-30-900-AS OMRON 40259-1090 MP21-30-900-AS

Actuator: One-way roller arm lever (vertical).
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 2NC(Snap-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available 40259-1090 MP21-30-900-AS. )
M12-connector models are also available, saving on labor and,
simplifying replacement 40259-1090 MP21-30-900-AS
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only) 40259-1090 MP21-30-900-AS.
Certified standards: UL, EN (TÜV), and CCC. Type: Device Net.
The DeviceNet Communication Unit That .
Simplifies Managing Sensor Settings.
ON/OFF signals and incident light levels can be sent to the host,
PLC without any need for programming (DeviceNet communications,
slave functionality).
Threshold values and function settings can be read, written,
or taught (using the Message Communications function) 40259-1090 MP21-30-900-AS.
Simply connect the communication cables and slide the Amplifiers,
from the side for wire-saving .
Up to 16 Sensor Amplifiers can be connected. Sensing method: Through-beam type.
Sensing distance(slot width): 3.6 mm.
Output type: NPN output.
Output configuration: Dark-ON.
Cable length: 1 m.
Photomicrosensor with built-in,
amplifier and attached cable reduces,
external light interference.
Light modulation effectively reduces external light interference.
Wide operation voltage range: 5 to 24 VDC.
Easy operation monitoring with bright light indicator. Appearance: Shielded, M30.
Sensing distance: 10 mm.
Output: NPN.
Model: Operation mode NO.
Aluminum and Iron Both.
Detectable from Long Distances. Measuring voltage: 6 to 60 mV AC/DC, 10 to 100 mV AC/DC, 30 to 300 mV AC/DC.
Supply voltage: 200-230 VAC.
Ideal for voltage monitoring for industrial.
facilities and equipment.
Monitor for overvoltages or undervoltages.
Manual resettingg and automatically resetting supporrted by one Relay OMRON 40259-1090 MP21-30-900-AS.
One SPDT output relay, 6 A at 250 VAC (resistive load).
Output relay can be switched between normally open and normally closed.
Process control signal (0 to 10 V) and current splitter input ssuppported OMRON 40259-1090 MP21-30-900-AS.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply.
40259-1090 MP21-30-900-AS Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=40259-1090 MP21-30-900-AS&select=5