Sale MR-J3ENCBL10M-A1-H MITSUBISHI MR-J3ENCBL10M-A1-H

Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.Motor series: medium inertia, medium capacity.
Using a serial absolute / incremental encoder.
Rated output power: 5.0kw.
Rated speed: 2000rpm.
With the brake: without.
Shaft end: straight shaft.
The rotor of AC servo motor is usually made of squirrel cage, but in order to make the servo motor has a wide range of speed regulation, linear mechanical properties,
Without the "rotation" phenomenon and the performance of the fast response, it is compared with the ordinary motor,
The two characteristics of rotor resistance and moment of inertia should be provided MR-J3ENCBL10M-A1-H
At present, there are two kinds of rotor structure, one is the squirrel cage rotor, which is made of conductive material with high resistivity,
In order to reduce the moment of inertia of the rotor, the rotor is slender MR-J3ENCBL10M-A1-H. MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 11.0kw.
Interface type: SSCNET type III fiber communication MR-J3ENCBL10M-A1-H.
Special specification: suitable for direct drive servo motor.
Power specification: three phase AC200V .
Direct drive system suitable for high speed and high precision!
High speed operation can be realized by direct drive (2m/s), and the traditional mechanical transmission can not achieve such a high speed.
The full closed loop control can be realized by using the position feedback signal from the load side encoder, such as the linear encoder.
The use of a flexible linear servo motor drive components can make the system more compact structure.
The primary side of the linear servo motor (motor coil) is sliding along the secondary side (permanent magnet) of the motor,
So linear servo motor is especially suitable for large range of applications. In addition, linear servo motor can be connected in series,
Especially for large systems in two axes for high precision synchronous operation. Applicable model: A95_GOT (-M3).Motor series: medium inertia, medium power.
Rated output power: 1.0kw.
Rated speed: 2000r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Protection level: IP65 (IP67).
Features: medium inertia from low speed to high sppeed three modes for selection, suitable for different applications MITSUBISHI MR-J3ENCBL10M-A1-H.
Application examples: transmission machinery, robots, X-Y working platform.
High resolution encoder 131072p/rev (17 bit).
The encoder with high reesoolution ensures excellent performance and stability at low speed MITSUBISHI MR-J3ENCBL10M-A1-H.
All motor dimensions are the same as before and all are compatible with the wiring.
MR-J3ENCBL10M-A1-H Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-J3ENCBL10M-A1-H&select=5