E2B-M18LS08-WZ-C1 5M OMRON E2B-M18LS08-WZ-C1 5M

Name: Small reflector.
Directional angle: 30° min.
Ambient operating temperature range: 0 to 40°C.
Ambient storage temperature range: -40 to 70°C.
Ambient operating humidity range: 35% to 85%.
Ambient storage humidity range: 35% to 85%.
Degree of protection: IEC IP67.
Accessories: Phillips screws M3 × 8, spring washers M3, nuts M3 OMRON E2B-M18LS08-WZ-C1 5M. Type: rectangle.
Screen mode: level 2.
Output: SPDT.
Power supply voltage: DC24V E2B-M18LS08-WZ-C1 5M
Contact type: small load operation (AC125V, 0.1A; DC30V, 0.1A).
Operation: instantaneous action (auto reset).
Color: yellow.
Color: red.
In the touch and the ability to protect than OMRON''s previous models have improved OMRON E2B-M18LS08-WZ-C1 5M.
The micro volume design of 23mm is realized.
Micro design and unique combination of soft sensing .
LED has five colors (red, yellow, green, white, and blue).
Built in basic switch improves touch.
Built in basic switches in the previous model based on the OMRON to improve the protection.
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient OMRON E2B-M18LS08-WZ-C1 5M. Easy and optimum settings for anyone.
Smart Fiber Amplifier Unit with Long-term Stable Detection .
Equipped with Smart Tuning, which automatically configures the,
settings to their optimum values with the press of a single button.
Highly usable design enables anyone to configure the settings easily.
Detects dirt, vibrations, and LED deterioration, and automatically,
compensates the incident level and the light intensity.
Unparalleled best-in-class power provides stable detections for low,
reflective workpieces and large workpieces (equipped with GIGA RAY II). Classification: For input.
Internal I/O circuit common: NPN (– common).
I/O points: 8 input points.
Connector Connection Models that.
Allows Easy Connection to Sensors and Output Devices.
Sensors with easy-to-wire connectors are easily,
attached or detached.
Connects to 2-wire sensors.
Remote teaching of the Sensor Terminal is possible.
with the PLC by using output signals of the Sensor Terminal.
DIN track mounting and screw mounting are available. Output voltage: 12 V.
Output current: 2.5 A.
Screw terminal Model: With Bus Line (See note 1.).
Block-type Switch Mode Power Supply That.
Mounts to DIN Rail.
One model covers 30 to 120 W (12-V models).
One model covers 60 to 240 W (24-V models).
Easy creation of multi-poower supply configurationns with different,
output power supplies connected together (5-V, 12-V, and 24-Vmodels) E2B-M18LS08-WZ-C1 5M.
Improve power supply system reliability by creating N+1 redun,
dant systems (12-V and 24-V models).
RoHS-compliant.
Input conditioonss: 80 to 370 VDC supported for DC input too,
(EC Directives and safety standards are not applicable E2B-M18LS08-WZ-C1 5M. )
Operating temperatures to –20°C (24-V models).
E2B-M18LS08-WZ-C1 5M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2B-M18LS08-WZ-C1 5M&select=5