E2G-M30KN18-WS-C2 OMRON E2G-M30KN18-WS-C2

Air purification unit.
Apply: 250mm.
Power specifications: DC24V.
The more thin, more large wind ZN series flexible and quickly realize the cleaning.
Can be based on the size of the clean room selection of 3 sizes. Type: 1a1b welding terminal.
Shape: rectangle.
Type: General load.
Motor function: alternate action (self retaining) OMRON E2G-M30KN18-WS-C2.
With light: LED with light.
Using voltage: DC5V.
Operation Department color: white E2G-M30KN18-WS-C2
20mm long, with 12 round series
High brightness all one side light.
Because it is round, so easy to punch.
Miniaturization, operation feel good. Number of beams: 23.
Protective height: 570mm OMRON E2G-M30KN18-WS-C2.
Model: PNP output.
Basic Type with a combination of.
performance and functionality .
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions. Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 2-wire, (1)-(4) pin arrangement.
Model: Operation mode, NO OMRON E2G-M30KN18-WS-C2.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor .
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available. Product name: NB7W.
Specifications: 7 inch, TFT LCD, Color, 800 × 480 dots , USB Host, Ethernet.
The feature-rich, economic.
programmable terminal.
More than 65,000 display colors TFT, color touch-screen.
for all models.
Available in sizes ranging from 3 to 10 inches.
Long-life LED backlight.
Serial, USB or Ethernet communication.
USB memory stick support. Structure: single stable type.
Contact structure: 1a.
Structure: high flux protection.
Coil rated voltage: DC24V.
Voltage resistant 10kV 1 pole 3A open close small relay.
High power electromagnetic loop is used to achieve high sensitivity (200mW).
Small relays, but can ensure the impact resistance of 10kV. Release key type: Special release key.
Indicator: Orange.
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 2NC/1NO+2NC/1NO.
Conduit opening: G1/2.
Holding Force of 3,000 N.
Two ssafety circuits and twwo monitor contacts provide an,
array of monitoring patterns E2G-M30KN18-WS-C2.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas. .
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas E2G-M30KN18-WS-C2.
IP67 degree of protection.
E2G-M30KN18-WS-C2 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2G-M30KN18-WS-C2&select=5