E3Z-FDN18 2M OMRON E3Z-FDN18 2M

Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: SJT(O) cable *3.
Actuator: Roller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models OMRON E3Z-FDN18 2M. )
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material E3Z-FDN18 2M
Cable lengths of 3 and 5 m available on standard models OMRON E3Z-FDN18 2M.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers .
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Rated voltage: 230 V .
Permitted voltage fluctuation range: 85% to 110% rated voltage OMRON E3Z-FDN18 2M.
Frequency: 50/60 Hz.
Rated current: 50 Hz, 0 . 075 A; 60 Hz, 0.065 A .
Rated input: 50 Hz, 12 W; 60 Hz, 11 W.
Rated rotational speed: 50 Hz, 2500 r/min; 60 Hz, 3000 r/min.
Maximum flow rate: 50 Hz, 0.5 m3/min; 60 Hz, 0.6 m3/min.
Maximum static pressure: 50 Hz, 34.0 Pa; 60 Hz, 49.0 Pa.
Noise: 50 Hz, 33 dB; 60 Hz, 36 dB.
Optimum Cooling with a Comprehensive.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment.
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bladed models,
(28 type) included in series.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certified safety standards depend on the,
product. Check the information given for available models of Axial fans and,
the information in Characteristics. Cable with connector (1 to 1) /G79-_C.
L size: 3000mm.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable. Function name: 3 phase 200V.
Power: 0.4KW.
Maximum output voltage: three phase 200 ~ 240VAC (corresponding input voltage).
Rated voltage, frequency: three-phase power supply 200 ~ 50/60Hz, 240V.
Cooling way: natural wind cooling.
Weight: 1.1kg.
Simple but not simple, casual and not casual.
Homogenization of today, the quality of the subtle show.
Standard configuration has RS485 interface, Modbus bus coommunication funcction E3Z-FDN18 2M.
3Hz provides more than 150% torque output.
2-15kHz carrier frequency, can achieve mute driver.
Equipped with simple energy saving function.
Compact size and uniform, and can be installed close to the side by side.
Signal outpputt function for controlling external brake action E3Z-FDN18 2M.
Software setting operation mode, no need to connect the control line can be used for speed control.
E3Z-FDN18 2M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E3Z-FDN18 2M&select=5