E6B3-CWZ5G 30P/R 0.5M OMRON E6B3-CWZ5G 30P/R 0.5M

Ratings: Standard load; 5 A at 125 VAC.
Cable: VCTF oil-resistant cable *1.
Actuator: Roller lever, high sensitivity.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models OMRON E6B3-CWZ5G 30P/R 0.5M. )
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material E6B3-CWZ5G 30P/R 0.5M
Cable lengths of 3 and 5 m available on standard models OMRON E6B3-CWZ5G 30P/R 0.5M.
Models also available with UL and CSA-certified cables .
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Pole number: 4 pole.Name: HFU with Programless Communications *1 OMRON E6B3-CWZ5G 30P/R 0.5M.
Power supply voltage: 24 VDC supplied from the End Unit .
No. of control points: None.
Control outputs 1 and 2: None.
Control outputs 3 and 4: None.
Auxiliary output: Transistor output: 4 points (sinking).
Functions: burnout Heater alarm, None; Event inputs, 4.
Communications functions: Port C: RS-422,
From End Unit: Port A: RS-485.
Input type: No input.
Terminal: M3 terminal.
In-panel Temperature Controller with Flexible,
Modular Design and Wide Integration with Host,
Devices.
The compact modular structure enables construction of temperature,
systems optimally suited to the application.
Connection can be made to a Programmable Controller without any,
programming required, reducing the number of steps required in ladder,
programming design.
One fully universal-input Unit includes a thermocouple, platinum-resistance,
thermometer, and analog input for easy selection and reduced inventory,
requirements.
Connecct directly to the G3ZA Muulti-channel Power Controller using,
optimum cycle control for high-accuracy regulation with minimal noise E6B3-CWZ5G 30P/R 0.5M.
Autotuning (AT) can be used for independent heating/cooling PID control.
Self-tuning (ST) can be used to calculaatee the PID constants with the step,
response method E6B3-CWZ5G 30P/R 0.5M.
Up to 16 Temperature Controllers can be connected to a single DeviceNet,
Communications Unit.

E6B3-CWZ5G 30P/R 0.5M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E6B3-CWZ5G 30P/R 0.5M&select=5