F3SN-A0862P25-01 OMRON F3SN-A0862P25-01

E32-D12F type: resistant to environmental type; resistant to drugs,
Specialty: Heat: Teflon packing; long distance 7,
Bending radius (mm): R40.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsActuator: One-way roller arm lever (vertical).
Conduit size: 1-conduit; M20 OMRON F3SN-A0862P25-01.
Built-in switch mechanism: 2NC/1NO (Slow-action).
A Series of Pull-reset Models Now F3SN-A0862P25-01
Available.
Lineup includes three contact models with 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC.
M12-connector models are available, saving on labor and,
simplifying replacement OMRON F3SN-A0862P25-01.
Standardized gold-clad contacts provide high contact reliability .
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC. Appearance: Round/Flat type A22-F.
Output: DPST-NO.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black) OMRON F3SN-A0862P25-01.
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring) .
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Model: C200H-OC226N.
No. of points: 16 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads).Thermocouple type: K (CA).
Heat resistance: heat resistant.
External: silicon outer foreskin.
Compensating wire length: 4 M.
A variety of high precision temperature sensor series.
On the basis of the previous M3 screw,
An additional rod like terminal corresponding to the reduced wiring working hours.
A temperature sensor is used as a thermal sensor for a thermostat.
According to the temperature, place, the surrounding environment to be measured.
Products with various shapes, shapes, lengths and terminals.
The main body: terminal type, temperature input type.
Category: control output 1 point type (power supply AC100 ~ 240V).
Shell color: black.
Control output: voltage output (SSR driver).
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
Heater with broken wire, SSR fault, heater over current detection function /ES1B power supply: ES1B power supply.
Event input points: -.
Transfer output: -.
Communication: RS-485.
48mm general thermostat has been upgraded & function / performance upgrade.
Indicates that the accuracy is increased and the preventive maintenance function is increased,
Furthher performance improvement F3SN-A0862P25-01.
E5CN-U (insert type) add analog input and current output type.
Add PV/SV status display function, convenient to check the state of the thermostat (automatic / manual, RUN/STOP, alarm),
Interactivee ddisplay PV/SV F3SN-A0862P25-01.
Increase the number of control output ON/OFF counting function, can prevent the maintenance of temperature controller internal relay.
F3SN-A0862P25-01 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=F3SN-A0862P25-01&select=5