F3SX-ER2-TW10 OMRON F3SX-ER2-TW10

Appearance: Knob-type Selector Switch A22W,
LED lighting (without Voltage Reduction Unit).
Number of notches: 2 notches.
Resetting method: Manual.
Output: SPST-NO + SPST-NO.
Operating voltage: 24 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia OMRON F3SX-ER2-TW10. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature F3SX-ER2-TW10
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models) OMRON F3SX-ER2-TW10.
IP65 (lighted models). Specification: Resin, standard type.
Shaft interior (tolerance *) exterior dia: 4 dia . (Height: 8), 13 dia.
Couplings.
Coupling Materials and Characteristics.
OMRON provides two types of couplings for different.
application conditions: Resin and metal.
Select the best type for the application. Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC OMRON F3SX-ER2-TW10.
Cable: SJT(O) cable *3.
Actuator: Sealed pin plunger.
Cable length : 5 m.
Compact Limit Switch That''s Also .
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Appearance: Integrated type.
Optical system: Through-beam.
Measuring width: 28mm.
Sensing distance: 40mm.
Resolution: 10µm.
Output type: NPN.
Measurable at any position.
The usual limitations, such as the ''measurementt,
area being connfined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome F3SX-ER2-TW10. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at orr wwhichever way it is inserted F3SX-ER2-TW10.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area.
F3SX-ER2-TW10 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=F3SX-ER2-TW10&select=5