F3ZN-S0195N15-01 OMRON F3ZN-S0195N15-01

E3JM-R4M4 detection method: Regression reflection type with M.S.R. function,
Connection: terminal plate,
Detection range: 4m.
Output status: ON into the light; light shading ON; switch conversion type.
Output: relay.
2 types of cost reductionRatings: 1 A at 125 VAC.
LED indicator: With indicator.
Actuator: Pin plunger OMRON F3ZN-S0195N15-01.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector F3ZN-S0195N15-01
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) OMRON F3ZN-S0195N15-01.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) C200H-CPU31-E CPU
High-Performance CIM Version
The C200H-CPU31-E controller offers a high-performance CPU especially designed for computer integrated manufacturing environments.
The C200H-CPU31-E has all the capabilities of C200H C200H CPU21/CPU23,
with clock/calendar as a standard feature OMRON F3ZN-S0195N15-01. This CPU is used in either SYSMAC NET and/or SYSMAC LINK communicationE32-T15Y type: standard type; standard,
Specialty: plane shape side,
Shape / detection distance (mm): 600; 460; 300 (120),
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: 1 (0.005),
Fiber element for meeting diversified needsStandard certification: No.
Insulation mode: three end two-way photoelectric switch.
Zero trigger function: No.
Action indicator: No.
Applicable load of output: AC100 3A ~ 240V.
Input rated voltage: DC24V.
With the LY1, LY2 large power relay with the same shape of the G3H series, the new international standard certification (-VD type).
Achieved UL, CSA, EN (VDE certification) standard certification. (type -VD)
Socket terminal type of same size with LY (1 pole, 2 pole type).
A model with an action indicator to check the status of the input. (type N)Size: 48 * 48mm, terminal type.
Category: control output 2 point type (power supply AC100 ~ 240V).
Shell color: black.
Control output 1: voltage output (SSR driver).
Control output 2: voltage output (SSR driver).
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
Heater break, SSR fault detection function: -.
Event entry point: 2.
Transfer output: -.
Communication: -.
New program type.
A new type of liquid crystal with high performance cost ratio is adopted in the 256 paragraph,
Visual angle, contrast can be improved.
Can be set up to 8 procedures (mode) x 32 (step) procedure.
High resolution 5 bit display / can display 0.01 degrees C (to achieve a small size of 48 x 48mm).
High speed sampling period 60ms.
Full of all models (capable of thermocouple /Pt/ analog input switching),
1 machines to support a variety of sensors.
Add PV/SV state display function, tto see the state of tthe thermostat
(automatic / manual, RUN/RESET, alarm),
Interactive display PV/SV F3ZN-S0195N15-01.
By supporting software (Ver.4.3 CX-Thermo),
In simple arithmetic functions (AND/OR logic and delay).
Setting the program settings that can performm fflexible contact output F3ZN-S0195N15-01.
The control output ON/OFF times counting function can predict the fault of the internal relay of the temperature controller.
F3ZN-S0195N15-01 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=F3ZN-S0195N15-01&select=5