FQ-CR20100F-M OMRON FQ-CR20100F-M

Appearance: Round/Flat without Voltage Reduction Unit M22-F.
Lighting: LED.
Operating voltage: 24 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Round Indicator Series with 22 dia. and.
25 dia. (when using a ring).
Same type as the A22-series Pushbutton Switches OMRON FQ-CR20100F-M.
Use 25-dia. ring to install in 25-dia. panel cutouts.
IP65. Dimensions: A, 1000mm; B, 1000mm FQ-CR20100F-M
Model: Black.
Safety outputs: SPDT-NO.
Auxiliary outputs: SPDT-NC.
Rated voltage: 24 VDC.
Terminal block type: Screw terminals.
New Safety Mat That Is Easy to.
Install and Maintain.
Simple connection allows multiple mats to be joined together OMRON FQ-CR20100F-M.
A wide variety of mat sizes are available.
Obtained EN1760-1 and EN ISO13849-1 (PLd/Safety .
Category 3) certification.
Complies with North American safety standards,
including ANSI/RIA15.06-1999. Number of notches: 2 notches.
Output: DPDT.
Reset method: Manual.
Key release position: Right.
Separate Construction with Cylindrical.
16-dia. Body.
Short mounting depth, less than 28 OMRON FQ-CR20100F-M. 5 mm below panel.
Wide range of switching capacity from standard to microload .
Oil-resistant IP65 models. I/O Interface UnitFunction name: single phase 200V.
Power: 0.4KW.
Maximum output voltage: three phase 200 ~ 240VAC (corresponding input voltage).
Rated voltage, frequency: single phase power supply 200 ~ 50/60Hz, 240V.
Cooling way: natural wind cooling.
Weight: 1.1kg.
Simple but not simple, casual and not casual.
Homogenization of today, the quality of the subtle show.
Standard configuration has RS485 interface, Modbus bus communication function.
3Hz provides more than 150% torque output.
2-15kHz carrier frequency, can achieve mute driver.
Equipped with simple energy saving function.
Compact size and uniform, and can be installed close to the side by side.
Signal output function for controlling external brake action.
Software setting opeeration mode, no nneed to connect the control line can be used for speed control FQ-CR20100F-M. Specification: Resin, different end diameter.
Shaft interior (tolerance *) exterior dia: 6 dia., 8 dia. (Height: 8), 19 dia.
Couplings.
Coupling Materials and Charaactteristics FQ-CR20100F-M.
OMRON provides two types of couplings for different.
application conditions: Resin and metal.
Select the best type for the application.
FQ-CR20100F-M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=FQ-CR20100F-M&select=5