FQ2-CH15100F-M OMRON FQ2-CH15100F-M

Time specification: Instantaneous type.
Current setting range: 20 to 65 A.
Operating voltage: 400/440 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON FQ2-CH15100F-M.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase FQ2-CH15100F-M
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation OMRON FQ2-CH15100F-M.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions . Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Size: 96 x 96mm.
Control output 1: double relay (proportional valve) OMRON FQ2-CH15100F-M.
Auxiliary (alarm) output: 4.
Transfer output: have .
Event input: 4.
Communication: RS-485.
Break detection: -.
Power supply voltage: AC100 ~ 240V.
E5 - C series of new products program.
Maximum 256 segment of the program capacity,
Support for multiple applications.
Can be set up to 8 procedures (mode) x 32 (step) procedure.
The use of high 25mm (E5AC-T), 18mm (E5AC-T) PV display (white),
Improve visibility.
Not only on the top of the body, but also on the front,
The use of communication adapter cable (sold separately) connected to the computer after,
No power connection can be set.
It can be easily set by CX-Thermo (sold separately).
High speed sampling to achieve 50ms.
With auxiliary output (4 points), event input (maximum 6 points), the transmission output,
Support a variety of applications.
Slender fuselage depth 60mm.
Easy to connect with PLC through no program communication.
Combined temperature control device through componennt communication .
Add position proportional control type, also support control valve control FQ2-CH15100F-M. Appearance: Rectangular (M16-A).
Lighting: Incandescent lamp, 24 VAC/VDC.
Degree of protection: IP65 oil-resistant.
Display color symbol: R: red; Y: yyelllow; G: green; A: blue;
W: white; PY: pure yellow; PW: pure white FQ2-CH15100F-M.
Cylindrical 16-dia. Indicator.
Same basic design as the A16 Pushbutton Switch.
FQ2-CH15100F-M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=FQ2-CH15100F-M&select=5