G2R-1A4-H DC5 OMRON G2R-1A4-H DC5

Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 2-wire, (3)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available OMRON G2R-1A4-H DC5. Power supply voltage: 24 VAC/DC.
Ideal for Liquid Level Control in G2R-1A4-H DC5
Industrial Facilities and Equipment.
Self-holding circuit implemented with circuit processing that is,
not depending on external wiring.
Switch between water supply and discharge with a DIP switch setting OMRON G2R-1A4-H DC5.
Sensitivity adjustment of operating resistance from 10 k to 100,
kΩ for application to a wide range of liquids .
Prevents chattering of relay contacts that occurs with ripples.
Easy wiring with ferrules.
Use 2 × 2.5 mm2 solid wire or 2 × 1.5 mm2 ferrules.
Applicable as a floatless switch. Safety outputs: Instantaneous, DPST-NO; OFF-delayed, --.
Auxiliary outputs: 1 (Solid-state) OMRON G2R-1A4-H DC5.
Max. OFF-delay time: --.
Rated voltage: 24 VDC.
Complete line-up of compact units,
including OFF-delayed safety output models .
17.5 or 22.5 mm width to save mounting space.
Simple wiring using screw-less terminals.
Easy maintenance with status indicators.
One unit for various safety devices, from contact input to PNP input. Name: Slice I/O Units; Analog I/O Units.
Specifications: Analog inputs (current/voltage).
Standards: CE, UC1, L.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. No. of cable cores: 4.
Cable connection direction: Straight/Straight.
Cabble length L: 2 m G2R-1A4-H DC5.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one toucch G2R-1A4-H DC5.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles.
G2R-1A4-H DC5 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=G2R-1A4-H DC5&select=5