G3NA-250B-UTU DC5-24 OMRON G3NA-250B-UTU DC5-24

F150-VM Name: monitor cable.
Process menu and macro function
Contribute to the reduction in the time of the import! Terminal (Wire connection): Screw terminal.
Classification: Microloads.
Latching lever (Test switch): No.
Rated input voltage: AC/DC, 48V.
Global standard size, low profile slim.
I/O relay with width 6 OMRON G3NA-250B-UTU DC5-24. 2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel G3NA-250B-UTU DC5-24
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available OMRON G3NA-250B-UTU DC5-24.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location) .
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Type of input: AC current input.
Output type: no output OMRON G3NA-250B-UTU DC5-24.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V .
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) some models are not equipped with depth.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type.
The depth (panel below) is only short size 95mm. Corresponding thermocouple type: J (IC).
Purpose: heat resistant.
Symbol: JX-2-H.
Outside: all glass fiber outer wrapping stainless steel shielding layer.
Structure (element number / element diameter): 7/0.32.
Temperature range: - 20 ~ 9150.
Tolerance: plus or minus 140 mu V.
Appearance collor: yellow .
A variety oof high precision temperature sensor series G3NA-250B-UTU DC5-24.
On the basis of the previous M3 screw,
An additional rod like terminal corresponding to the reduced wiring working hours.
A temperature sensor is used as a thermal sensor for a theermmostat G3NA-250B-UTU DC5-24.
According to the temperature, place, the surrounding environment to be measured.
Products with various shapes, shapes, lengths and terminals.
G3NA-250B-UTU DC5-24 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=G3NA-250B-UTU DC5-24&select=5