OMRON E2EQ-X4X1-M1J 0.3M E2EQ-X4X1-M1J 0.3M

Insulation method: Photovoltage coupler.
Operation Display: Yes(green).
Output(SSR): DC.
Zero cross Function: --.
Rated output Load: 3 A(at 5 to 24 VDC).
Rated input voltage (socket): 24 VDC, 24 VAC/VDC.
Applicable model: G3RV-SR700/500-A DC24V, G3RV-SR700/500-A AC/DC24V.
Global standard size,
low profile slim I/O relay with width 6 OMRON E2EQ-X4X1-M1J 0.3M. 2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel E2EQ-X4X1-M1J 0.3M
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals OMRON E2EQ-X4X1-M1J 0.3M.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.) .
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay or solid-state relay has a plug-in terminal OMRON E2EQ-X4X1-M1J 0.3M.
that is difficult to bend at the time of exchange. Unit: High-density connector model .
I/O classification: Digital input.
Internal I/O common: PNP (- common).
I/O points: 32.
I/O connections: Fujitsu connector.
Power supplyvoltage: 24 VDC.
I/O specification: DC/transistor.
Digital I/O Units Compatible with MULTIPLE I/O TERMINAL,
Terminal block, connector, and high-density connector,
models are available.
The circuit block of the terminal block model can be,
mounted or dismounted for ease of maintenance without,
disconnecting the wires.
DIN track mounting. Appearance: Shielded, M18.
Sensing distance: 7 mm.
Output configuration: DC 2-wire (polarity).
Operation mode: NO.
Proximity Sensor Ideal for the Food and Beverage Industry. Appearance: Close-mounting.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: PNP output.
Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs:: light-ON and dark-ON E2EQ-X4X1-M1J 0.3M.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator caan be seen from many directions to enable,
installation in more locations E2EQ-X4X1-M1J 0.3M.
Connector with lock that mates with commercially available,
connectors.
E2EQ-X4X1-M1J 0.3M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2EQ-X4X1-M1J 0.3M&select=5