OMRON F39-EJ1199-L F39-EJ1199-L

Detection methods: the firing pattern.
Detection range: 1m.
Purpose: small,
Small thin space probe;
Interference prevention function with close installationAppearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 2-wire.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor OMRON F39-EJ1199-L.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected F39-EJ1199-L
Pre-wired Smartclick Connector Models also available. Contact type: Standard load (250 VAC, 2 A; 125 VDC 0.4 A).
Operation: Alternate operation (Self-holding).
Output: DPDT.
Lighting: LED, 24 VDC OMRON F39-EJ1199-L.
Operation Unit color symbol: Enter the desired color symbol for the,
Pushbutton in @@ . R (Red); Y (Yellow); G (Green); A (Blue); W (White).
Pushbutton Switch Series with.
Square 40-mm Body.
Combines miniature design with distinct but soft sense of operation.
Easy panel mounting from the front and simple lamp replacement.
without tools. Easy and optimum settings for anyone.
Smart Fiber Amplifier Unit with Long-term Stable Detection OMRON F39-EJ1199-L.
Equipped with Smart Tuning, which automatically configures the,
settings to their optimum values with the press of a single button .
Highly usable design enables anyone to configure the settings easily.
Detects dirt, vibrations, and LED deterioration, and automatically,
compensates the incident level and the light intensity.
Unparalleled best-in-class power provides stable detections for low,
reflective workpieces and large workpieces (equipped with GIGA RAY II). Input type: PNP input type.
Event input terminal 5 points (S-TMR, HOLD, RESET) is equipped with.
External power 80mA DC12V.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
Communication: RS-485; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
Digital rotating pulse meter with high speed measurement for 50kHz.
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of 50kHz high speed pulse.
Can rotate the encoder and a variety of ON/OFF pulse signal, up to 50kHzItem: Advanced models, External-input models.
Functions: Remote setting, differential operation.
Model: PNP output.
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°°C (for 5 .4-dia. F39-EJ1199-L. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening witth,,
fine positioning to maximize variations F39-EJ1199-L.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit.
F39-EJ1199-L Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=F39-EJ1199-L&select=5