OMRON F39-JC3A-D F39-JC3A-D

Actuator: Resin rod (rod diameter: 8).
Hermetic, Molded terminals, -140 models.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches OMRON F39-JC3A-D.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads F39-JC3A-D
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models OMRON F39-JC3A-D. Rated voltage: 100 V .
Permitted voltage fluctuation range: 85% to 110% rated voltage .
Frequency: 50/60 Hz.
Rated current: 50 Hz, 0.063 A; 60 Hz, 0.055 A .
Rated input: 50 Hz, 5 W ; 60 Hz, 4 W .
Rated rotational speed: 50 Hz, 1900 r/min; 60 Hz, 2100 r/min.
Maximum flow rate: 50 Hz, 0.4 m3/min; 60 Hz, 0.5 m3/min.
Maximum static pressure: 50 Hz, 19 OMRON F39-JC3A-D. 5 Pa; 60 Hz, 23.5 Pa.
Noise: 50 Hz, 28 dB; 60 Hz, 30 dB.
Optimum Cooling with a Comprehensive .
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment.
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bladed models,
(28 type) included in series.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certified safety standards depend on the,
product. Check the information given for available models of Axial fans and,
the information in Characteristics. Extremely thin beam ideal for detection of minute objects and marks.
Ideal for detection of small objeects and slightt color differences F39-JC3A-D.
Bad mark detection.
Detection of thin wire of 200 μ.
Detection of slight level differences. E32-TC200F4 type: standard type; standard,
Specialty: M3 screw (small) with casing,
Shape / detection distance (mm): 22700; 220; 125 (50),
Bending radius (mm): R10 F39-JC3A-D.
Standard test object (minimum test object) (mm) 1: 1 (0.0005),
Fiber element for meeting diversified needs
F39-JC3A-D Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=F39-JC3A-D&select=5