OMRON F3SJ-A0515N14 Price F3SJ-A0515N14

Appearance: Close mounting.
Sensing method: Throughbeam type(with slot).
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: Incident light.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity F3SJ-A0515N14 Price.
Series includes models that enable switching between,
dark-ON and light-ON operation F3SJ-A0515N14
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available F3SJ-A0515N14 Price.
A wide range of variations in eight different shapes .
Flexible robot cable is provided as a standard feature. Number of input/outputs: 16.
Number of contacts: 20.
I/O: Outputs.
Common Terminals: YES.
Mounted Connector model: XG4A-2031.
Cable Connector model: XG4M-2030-T.
Accelerate Reductions in Factory.
Wiring and Labor with Screwless F3SJ-A0515N14 Price.
Terminals.
Clamp terminals eliminate the need to tighten screws.
Just insert the ferrule to complete one-touch wiring . Mounting type: W-bracket(see note).
Contact form: DPST-NO/DPST-NC.
Quick-connect terminals.
A High-capacity, High-dielectric-strength,
Multi-pole Relay Used Like a Contactor.
Miniature hinge for maximum switching power for motor loads,
as well as resistive and inductive loads.
No contact chattering for momentary voltage drops up to 50%,
of rated voltage.
Withstanding more than 4 kV between contacts that are differ,
ent in polarity and between the coil and contacts.
Flame-resistant materials (UL94V-0-qualifying) used for all in,
sulation material.
Standard models approved by UL and CSA.
Unit type: CS1 Special I/O Units.
Product name: Isolated-type Resistance,
Thermometer Input Units (Ni508.4 Ω).
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: INi508.4.
Conversion speed (resolution):
100 ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.15A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savinngs in cost and space coompared,
with previous systems OMRON F3SJ-A0515N14.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUss,
to construct complete process control systems OMRON F3SJ-A0515N14.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.
F3SJ-A0515N14 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=F3SJ-A0515N14&select=5