Brand sort
Sale F2EL-X10F2-M1L OMRON F2EL-X10F2-M1L
next one: 
Last one: OMRON F2EL-X10F2-M1L
Insulation method: Photocoupler.
Operation indicator: Yes (yellow).
Zero cross function: No.
Applicable output load: 75 A, 180 to 480 VAC.
Rated input voltage: 5 to 24 VDC.
High-power, Load-control SSRs with.
High Current of 75 or 150 A and High.
Voltage of 240 or 480 VAC.
RoHS compliant.
Models also available with no zero cross F2EL-X10F2-M1L.
Replaceable power elements.
Conforms to cULus standards and EN standards (TÜV certification) F2EL-X10F2-M1L The superior performance of servo equipment, can be positioned in the application of display skills to the full.
Tracking performance to reach the industry leading level.
Speed response frequency up to 2kHz F2EL-X10F2-M1L.
Positioning accuracy is very good.
Equipped with 20bit high resolution incremental encoder .
Equipped with self setting function, adjust easily.
It requires ideal applications for high precision.
Suppression of vibration control function has been greatly improved. Type: Cable with Connectors on Both Ends (RJ45/RJ45).
Category: Cat.6a .
Cable sheath material: LSZH F2EL-X10F2-M1L.
Cable color: Yellow.
Cable length: 1 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks . Appearance: Knob-type Selector Switch A22W,
LED lighting (without Voltage Reduction Unit).
Number of notches: 3 notches.
Resetting method: Manual.
Output: SPST-NC + SPST-NC.
Operating voltage: 12 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Input terminals: Compact slotted screw terminals (detachable).
Isolation method: Phototriaccoupler.
Zero cross function: Yes.
Operation indicator: Yes.
Alarm output: 2 outputs (Heater Burnout Detection,
SSR Short-circuit Failure Detection).
Applicable load (See note.): 2 to 35 A, 100 to 240 VAC.
A New-concept SSR with Built-in.
Current Transformer.
Heater Burnout and SSR Short.
circuit Failure Detection.
Built-in Current Transformer (CT) helps reduce wiring steps.
Detects the burnout of any one of a group of heaters.
Detects thhe burnout of 3-phase heaaters OMRON F2EL-X10F2-M1L.
Detects SSR short-circuit failures.
Error detection level can be easily set with a switch.
Mounts to a DIN track or with screws.
Three types of input terminals available: M3 terminals,
screwless clamp termiinaals (detachable), or compact slotted,
screw terminals (detachable) OMRON F2EL-X10F2-M1L.
Certified for CSA and EN (TÜV).
The G3PF-2@@B-@@@ Series is UL certified.
F2EL-X10F2-M1L Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=F2EL-X10F2-M1L&select=5
Operation indicator: Yes (yellow).
Zero cross function: No.
Applicable output load: 75 A, 180 to 480 VAC.
Rated input voltage: 5 to 24 VDC.
High-power, Load-control SSRs with.
High Current of 75 or 150 A and High.
Voltage of 240 or 480 VAC.
RoHS compliant.
Models also available with no zero cross F2EL-X10F2-M1L.
Replaceable power elements.
Conforms to cULus standards and EN standards (TÜV certification) F2EL-X10F2-M1L The superior performance of servo equipment, can be positioned in the application of display skills to the full.
Tracking performance to reach the industry leading level.
Speed response frequency up to 2kHz F2EL-X10F2-M1L.
Positioning accuracy is very good.
Equipped with 20bit high resolution incremental encoder .
Equipped with self setting function, adjust easily.
It requires ideal applications for high precision.
Suppression of vibration control function has been greatly improved. Type: Cable with Connectors on Both Ends (RJ45/RJ45).
Category: Cat.6a .
Cable sheath material: LSZH F2EL-X10F2-M1L.
Cable color: Yellow.
Cable length: 1 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks . Appearance: Knob-type Selector Switch A22W,
LED lighting (without Voltage Reduction Unit).
Number of notches: 3 notches.
Resetting method: Manual.
Output: SPST-NC + SPST-NC.
Operating voltage: 12 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Input terminals: Compact slotted screw terminals (detachable).
Isolation method: Phototriaccoupler.
Zero cross function: Yes.
Operation indicator: Yes.
Alarm output: 2 outputs (Heater Burnout Detection,
SSR Short-circuit Failure Detection).
Applicable load (See note.): 2 to 35 A, 100 to 240 VAC.
A New-concept SSR with Built-in.
Current Transformer.
Heater Burnout and SSR Short.
circuit Failure Detection.
Built-in Current Transformer (CT) helps reduce wiring steps.
Detects the burnout of any one of a group of heaters.
Detects thhe burnout of 3-phase heaaters OMRON F2EL-X10F2-M1L.
Detects SSR short-circuit failures.
Error detection level can be easily set with a switch.
Mounts to a DIN track or with screws.
Three types of input terminals available: M3 terminals,
screwless clamp termiinaals (detachable), or compact slotted,
screw terminals (detachable) OMRON F2EL-X10F2-M1L.
Certified for CSA and EN (TÜV).
The G3PF-2@@B-@@@ Series is UL certified.
F2EL-X10F2-M1L Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=F2EL-X10F2-M1L&select=5
...more relevant model market price >>>>
Related products
Related download