D4C-6810 OMRON D4C-6810

Input type: high speed response type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External power supply DC12V80mA.
Output type: DeviceNet; -; DeviceNet.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
High speed, high precision measurement, determine the color display,
Can switch the green / Red 2 kinds of display colors OMRON D4C-6810.
Equipped with the sub pressure gauge for monitoring the operation trend D4C-6810
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type.
The depth (panel below) is only short size 95mm OMRON D4C-6810.
UL standard for recognitionAppearance: Knob-type Selector Switch A22W,
LED lighting (without Voltage Reduction Unit) .
Number of notches: 2 notches.
Resetting method: Automatic.
Output: SPST-NO + SPST-NC.
Operating voltage: 6 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit OMRON D4C-6810.
Finger protection mechanism on Switch Unit provided as a standard feature .
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Item: FZ4 Series Controllers; Quad Processing High-speed Controllers.
Descriptions: Box-type controllers.
High-Grade Proc'' Items: --.
No.of cameras: 2.
Output: NPN.
Remarks: --.
Speed and accuracy determine the basic,
performance of sensing.Usability efficiently,
puts that performance to work.OMRON’s FZ,
Series of Vision Sensors represent an evolu,
tionary journey that takes these three aspects,
from the past and into the future to allow you,
to increase quality. Shape: Heat-resistant, cylindrical.
Dimensions: M12 x 22 mm.
Sensing distance: 2 mm.
Resolution: 1 μm.
High-accuracy Detection oof Metal Workkpiece Displacement D4C-6810.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).

Eaasily perform calculation for two Sensors by using a Calculating Unit D4C-6810.
Prevent mutual interference for up to five Units by using a Calculating Unit.
D4C-6810 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=D4C-6810&select=5