D4NL-2CDA-B4S OMRON D4NL-2CDA-B4S

Size: 48 x 48mm.
Control output 1: relay output.
Control output 2:--.
Auxiliary output: 2 independent points.
Power supply voltage: AC100 ~ 240V.
Terminal type: screw terminal table type.
Input category: full range multi input.
Heater break, SSR fault detection function: -.
Communication: -.
Event input: 2 points OMRON D4NL-2CDA-B4S.
Remote SP input: there.
Transfer output: -.
Using large font PV display (white), improve visibility D4NL-2CDA-B4S
Selection, operation and setting.
Functional performance of input and output points.
Support for more extensive range of applications.
Using high PV 15.2mm display (white), improve visibility OMRON D4NL-2CDA-B4S.
High speed sampling to achieve 50ms.
With auxiliary output (maximum 3 points), event input (maximum 4 points), the transmission output,
Remote SP input function, support for a variety of applications .
E5CC 60mm has a depth of slender body.
The use of communication adapter cable (sold separately) connected with a computer.
After that, no power supply connection can be set.
It can be easily set by CX-Thermo (sold separately) OMRON D4NL-2CDA-B4S.
Easy to connect with PLC through no program communication .
Combined temperature control device through component communication. Actuator: Adjustable roller lever.
Conduit openings: M20.
2NC (Slow-action).
Robust safety limit switch with metal housing.
Slow-action and snap-action contact with,
certified direct opening operation certification.
Direct opening mechanism (NC contacts only) added to,
enable opening contacts when faults occur, such as fused contacts.
Safety of lever settings ensured using a mechanism that,
engages a gear between the operating position indicator plate and the lever.
Equipped with a mechanism that indicates the applicable,
operating zone, as well as push-button switching to control left and right motion.
Head seal structure strengthened to improve seal properties.
(TÜV: IEC IP67, UL: NEMA 3, 4, 4X, 6P, and 13).
Wide standard operating temperature range: –40 to 80°C (standard type).
Certified standards: UL, CSA, EN (TÜV), and CCC.
Category: external supply 100mA DC5V type.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
No output: -.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
To support the sensor input, the pressure, load, torque and weight were mmeasured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified D4NL-2CDA-B4S.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge foor monitoring the operation trend D4NL-2CDA-B4S.
External event input can be applied to a variety of measurement and identification situations.
Can enter DC0.001m
D4NL-2CDA-B4S Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=D4NL-2CDA-B4S&select=5