E32-L56E1 OMRON E32-L56E1

Time specification: Instantaneous type.
Current setting range: 20 to 65 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON E32-L56E1.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase E32-L56E1
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation OMRON E32-L56E1.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions . Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Appearance: Rectangular (M16-J).
Lighting: Incandescent lamp, 24 VAC/VDC OMRON E32-L56E1.
Degree of protection: IP40.
Display color symbol: R: red; Y: yellow; G: green; A: blue;
W: white; PY: pure yellow; PW: pure white .
Cylindrical 16-dia. Indicator.
Same basic design as the A16 Pushbutton Switch. Type: Flat Cable.
Terminal Block: Terminal block with M3.5 screws.
Connector: Flat Cable Connectors*1.
No. of poles: 40.
Simplifies Connector and terminal,
block replacement, and requires less,
in-panel wiring.
Mount to DIN Track or via screws.
MIL Flat Cable Connectors and Multi-pole, Square,
Connectors are standard.
Terminal blocks available with either M3 or M3.5 screws.
Connecting Cables for Programmable Controllers,
available (sold separately). Ideal for monitoring 3-phase power supplies.
for industrial facilities and equipment.
Monitor overvoltages andd undervoltagees for three-phase 3-wire,
or 4-wire power supplies E32-L56E1.
DIP switch setting for 3-phase 3-wire or 3-phase 4-wire power supply.
Two SPDT output relays, 6 A at 250 VAC (resistive load).
Separate outputs possible for overvoltages and undeervvoltages E32-L56E1.
World-wide power specifications supported by one Unit,
(switchable using DIP switch).
Relay status can be monitored using LED indicator.
E32-L56E1 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E32-L56E1&select=5