OMRON E32-ZD21L 2M

Appearance: Shielded, M18.
Sensing distance: 7 mm.
Output configuration: DC 2-wire (no polarity) .
Operation mode: NO.
Proximity Sensor Ideal for the Food and Beverage Industry. Terminal: Solder terminal.
Actuator: Short hinge roller lever.
Direct Current Switch with.
Built-in Magnetic Blowout OMRON .
Incorporates a small permanent magnet in the contact.
mechanism to deflect the arc to effectively extinguish it E32-ZD21L 2M
Same shape and mounting procedures as the Z Basic Switches. Frequency converter input power: 3 phase AC400V.
Weight: 2.6KG.
Standard applicable line diameter: 3.5 square mm or more.
Used to suppress harmonic currents generated by a transducer OMRON .
The effect of harmonic current suppression is better than that of AC reactor,
And it can be used with AC reactor . Appearance: Knob-type Selector Switch A22W,
LED lighting (without Voltage Reduction Unit).
Number of notches: 3 notches.
Resetting method: Automatic.
Output: SPST-NO + SPST-NC.
Operating voltage: 6 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); A (blue) OMRON .
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit .
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Name: Screw Terminal Block with Relay Outputs.
Specifications: Outputs;
8 outputs; Contacts.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Setting range: 2 to 20 mA AC/DC, 10 to 100 mA AC/DC, 50 to 500 mA AC/DC.
Power supply voltage: 24 VAC/DC.
Ideal for Current Monitoring for.
Industrial Facilities and Equipment.
Monitor for overcurrents and undercurrents simultaneously.
Separate settings and outputs supported for overcurrents and undercurrents .
UUse commercially available CTs (CT current on secondary,
side: 0 to 1 A or 0 to 5 A) OMRON E32-ZD21L 2M.
Manual resetting and automatically resetting supported by one Relay.
Startup lock and operating time can be set separately.
Two sets of SSPDDT output contacts, 5 A at 250 VAC (resistive load) OMRON E32-ZD21L 2M.
Output status can be monitored using LED indicator.
Inputs are isolated from the power supply.
E32-ZD21L 2M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E32-ZD21L 2M&select=5