OMRON ES100-CT021-202

Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON .
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase ES100-CT021-202
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction OMRON .
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions . Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Appearance: Shielded, M8.
Sensing distance: 2 mm OMRON .
Model: Output configuration: NPN NC.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions .
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature. Action indicator: LED action indicator, mechanical indicator.
Number of contacts: 2 pole.
Operating coil voltage: AC100/110V.
Universal relay the best-selling MY standard mechanical indicator, can confirm the action state contact.
According to the LED action indicator light color, can identify the AC coil specifications, DC coil specifications.
Online lap tape printing operation coil specifications, the recognition is higher.
All standard specifications indicating mechanism of mechanical action (mechanical indicator).
Suitable for environmental protection RoHS.
Conforms to the UL, CSA, IEC (VDE) standardC500-OC I/O Unit Transistor Output 32 pts C500-OC224-E(3G2A5-OC224-E).
AC250/DC24V 2A.Category: external supply 100mA DC10V.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Relay contact: HH; PASS1c, H, L, LL: each 1a.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To suupport the sensor input, tthe pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified OMRON ES100-CT021-202.
Action determine the color, can switch the green / Red 2 kinds of cooloor display OMRON ES100-CT021-202.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement
ES100-CT021-202 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=ES100-CT021-202&select=5