OMRON D3V-11-2C4 D3V-11-2C4

Model: A7PS.
Classification (See note 1.): Snap-in (front mounting).
Character height: Decimal: 6.8 mm Hexadecimal: 4.0 mm.
Terminals: Solder terminals.
Color: Light gray.
Output code number: 19 (decimal code, with component-adding provision).
Dust-tight, Easy-to-Use,
Push-operated Switches with Large OMRON D3V-11-2C4.
Display Characters.
Simple push mechanism and large, easy-to-view numeric display,
make setting easy D3V-11-2C4
Dust penetration prevented with seal for the display windows. Unit: Connector model.
I/O classification: Digital input.
Internal I/O common: NPN (+ common).
I/O points: 16.
I/O connections: Molex connector OMRON D3V-11-2C4.
Power supplyvoltage: 24 VDC.
I/O specification: DC/transistor.
Digital I/O Units Compatible with MULTIPLE I/O TERMINAL,
Terminal block, connector, and high-density connector,
models are available .
The circuit block of the terminal block model can be,
mounted or dismounted for ease of maintenance without,
disconnecting the wires.
DIN track mounting. Refer to Safety Precautions for All Power Controllers OMRON D3V-11-2C4.
Used in Combination with the G3PA to.
Enable High-precision Temperature Contro .
Use cycle control to achieve power control with little noise.
Used in combination with the G3PA to connect to single- and,
three-phase loads.
Three types of input method available: Internal adjuster,
external adjuster, or DC signals from 4 to 20 mA.
Streamline design. Both DIN track mounting and screw,
mounting possible.
Use linking terminals for close mounting of the G3PA.
Built-in isolation transformer.
Power supply range: 100 to 240 V. Model: C500-CPU11-EV1.
C500-CP CPU CPU MODULE JAPANESE C500-CPU11-EV1High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: there.
Shape: non shield, M12.
Detection range: 8mm.
Action mode: NO. Actuator: Coil spring (spring diameter: 6.5).
Hermetic, Molded terminals, -139 models.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environmennt-resistant, aand Spatter prevention Switches D3V-11-2C4.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, aandd four-direction head mounting D3V-11-2C4.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models.
D3V-11-2C4 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=D3V-11-2C4&select=5