Sale D4SL-N4RFA-D4N OMRON D4SL-N4RFA-D4N

Appearance: insert type.
Control supply voltage: DC100/110V.
Action elements: overload detection.
Action characteristic: instantaneous action type.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection D4SL-N4RFA-D4N.
A variety of models, such as anti time limit characteristics, lock time, instantaneous action, etc D4SL-N4RFA-D4N, are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation.
When the current is large, the input resistance of the CT or the relay part is not needed, and the use is simple D4SL-N4RFA-D4N.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple . Appearance: Rectangular (M16-A).
Lighting: Incandescent lamp, 12 VAC/VDC.
Degree of protection: IP65 oil-resistant.
Display color symbol: R: red; Y: yellow; G: green; A: blue;
W: white; PY: pure yellow; PW: pure white.
Cylindrical 16-dia. Indicator D4SL-N4RFA-D4N.
Same basic design as the A16 Pushbutton Switch. Type: Cable with Connectors on Both Ends (RJ45/RJ45) .
Category: Cat.6a .
Cable sheath material: LSZH.
Cable color: Yellow.
Cable length: 0.5 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Actuator: Roller lever (resin lever, resin roller).
Conduit size: 2-conduit; G1/2.
Built-in switch mechanism: 2NC/1NO (Slow-action).
A Series of Pull-reset Models Now.
Available.
Lineup includes three contact models with 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC.
M12-connector models are available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC. Measuring voltage: 20 to 200 V AC/DC, 30 to 300 V AC/DC, 60 to 600 V AC/DC.
Supply voltage: 24 VAC/DC.
Ideal for voltage monitoring for industrial.
facilities and equipment.
Monitor for overvoltages or undervoltages.
Manual resettingg and automatically resettting supported by one Relay OMRON D4SL-N4RFA-D4N.
One SPDT output relay, 6 A at 250 VAC (resistive load).
Output relay can be switched between normally open and normally closed.
Process control signal (0 to 10 V) and current splitter input ssuppported OMRON D4SL-N4RFA-D4N.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply.
D4SL-N4RFA-D4N Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=D4SL-N4RFA-D4N&select=5