Sale E5CZ-Q2MT AC100-240 OMRON E5CZ-Q2MT AC100-240

Function name: three phase 400V.
Power: 0.75KW.
Maximum output voltage: three phase 380 ~ 480VAC (corresponding input voltage).
Rated voltage, frequency: three-phase power supply 380 ~ 50/60Hz, 480V.
Cooling way: natural wind cooling.
Weight: 1.1kg.
Simple but not simple, casual and not casual.
Homogenization of today, the quality of the subtle show E5CZ-Q2MT AC100-240.
Standard configuration has RS485 interface, Modbus bus communication function E5CZ-Q2MT AC100-240
3Hz provides more than 150% torque output.
2-15kHz carrier frequency, can achieve mute driver.
Equipped with simple energy saving function.
Compact size and uniform, and can be installed close to the side by side E5CZ-Q2MT AC100-240.
Signal output function for controlling external brake action .
Software setting operation mode, no need to connect the control line can be used for speed control. Size: M8, Shielded.
Sensing distance: 2.0 mm.
Connection: M8 connector (3-pin).
Body material: Stainless steel.
Thread length (overall length): 49 (61).
Output configuration: PNP.
Operation mode NC E5CZ-Q2MT AC100-240.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1 . 5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Optical system: diffuse type.
Detection distance: 100 positive and negative 20mm.
Beam shape: linear beam.
Beam diameter: 3.5mm * 60 M.
Resolution: 1 m.
Cable length: 0.52m. Ratings: Standard load; 0.1 A at 125 VAC, 0.1 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Sealed pin plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulatiing material .
Cable lengths of 3 and 5 m available on standard models OMRON E5CZ-Q2MT AC100-240.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfiirmation of operation OMRON E5CZ-Q2MT AC100-240.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)
E5CZ-Q2MT AC100-240 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E5CZ-Q2MT AC100-240&select=5