Sale E6D-CWZ1E 2500 P/R 0.5M OMRON E6D-CWZ1E 2500 P/R 0.5M

Appearance: M4.
Sensing distance: 2 mm.
Connecting method: Pre-wired Models (2 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NC.
Wire color /pin arrangement: Brown: +V, Black: Output, Blue: 0 V.
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5 E6D-CWZ1E 2500 P/R 0.5M. 4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available E6D-CWZ1E 2500 P/R 0.5M
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation E6D-CWZ1E 2500 P/R 0.5M.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only) .
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. Specifications: Inputs; PNP (- common); 16 points.
I/O connections: M3 Screw terminals.
Rated internal circuit power supply voltage:
Supplied from the communications connector E6D-CWZ1E 2500 P/R 0.5M.
Rated I/O power supply voltage: 24 VDC.
Allows I/O Expansion with Transistor Terminals .
Wide variety of data, such as maintenance system data,
can be collected without affecting the productivity,
of the control system.
Valuable information can be collected,
and managed through the network, including information,
on the communications power supply.
voltage levels, Unit wear and tear,
and equipment operating information.
Expansion via Expansion I/O Units.
With no communications baud rate settings,
required and detachable terminal blocks,
maintenance is easier. Servo trunk unit.
Product Name: servo relay unit.
Application unit: CQM1H-PLB21, CS1W-HCP22-V1.
Specifications: -.
Axis number: single axis.
The connector and terminal of the relay unit are integrated into a whole,
Save the wiring servo drive and position control unit.
Seervo driver and control signal of position control unit,
Simple wiring on terminal stage OMRON E6D-CWZ1E 2500 P/R 0.5M.
The connector without soldering, with only a screwdriver can wiring.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installaatiion, screw installation of two methods OMRON E6D-CWZ1E 2500 P/R 0.5M.
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.

E6D-CWZ1E 2500 P/R 0.5M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E6D-CWZ1E 2500 P/R 0.5M&select=5