Home
>> Products
>> OMRON
>> Switch
>> Push button switch
>> button switch φ16 with light / without light / display lamp
>> A165K-T3ML-2 Reset method: Manual OMRON A165K-T3ML-2
A165K-T3ML-2 Reset method: Manual OMRON A165K-T3ML-2
Brand:
OMRON
Name: Key-type Selector Switch
Model: A165K-T3ML-2
Number of notches: 3 notches.
Output: DPDT.
Reset method: Manual.
Key release position: Left.
Separate Construction with Cylindrical.
16-dia. Body.
Short mounting depth, less than 28.5 mm below panel.
Wide range of switching capacity from standard to microload.
Oil-resistant IP65 models.
...More relevant models >>>>
Name: Key-type Selector Switch
Model: A165K-T3ML-2
Number of notches: 3 notches.
Output: DPDT.
Reset method: Manual.
Key release position: Left.
Separate Construction with Cylindrical.
16-dia. Body.
Short mounting depth, less than 28.5 mm below panel.
Wide range of switching capacity from standard to microload.
Oil-resistant IP65 models.
Output: DPDT.
Lighting: LED (with built-in reduced-voltage lighting function).
Operating voltage: 100/110 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia OMRON A165K-T3ML-2. Body.
Miniature design of 28.5 mm, the smallest class in the industry A165K-T3ML-2
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Appearance: Round/Full-guard type A22-G.
Output: SPST-NO + SPST-NO.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black) OMRON A165K-T3ML-2.
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type OMRON A165K-T3ML-2.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Conduit: Pg13.5.
Applicable cable: Cabtire cable.
Inner diameter (D)of seal rubber: 9.6 mm.
External diameter of cable: Min, 7 OMRON Key-type Selector Switch. 5 mm; Max, 9.5 mm.
Applicable model: WL@-G.
Connectors (SC Series).
Cabtire cables and flexible tubes with various diameters are used to,
connect machine tools and controllers with Limit Switches OMRON Key-type Selector Switch. To ensure,
the watertightness of the edges of the conduits, use an SC Connector,
that is suitable for the external diameter of cable and model of Limit Switch. Classification: Momentary operation.
Shape of Operation Unit: 40 dia OMRON Key-type Selector Switch.
Output: 2.
Operation Unit color: White (-WW) A165K-T3ML-2.
Long Service Life with Built-in Z-series.
Basic Switch.
Using a Basic Switch enables direct switching of large-capacity loads.
Shock-absorbing construction of Operation Unit protects the Switch.
Drip-proof Pushbutton consstruction enables use in locations subject to,
splashing water and oil and scattering dust OMRON A165K-T3ML-2.
Pushbuttons are available in three shapes and six colors.
Lighting: LED (with built-in reduced-voltage lighting function).
Operating voltage: 100/110 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia OMRON A165K-T3ML-2. Body.
Miniature design of 28.5 mm, the smallest class in the industry A165K-T3ML-2
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Appearance: Round/Full-guard type A22-G.
Output: SPST-NO + SPST-NO.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black) OMRON A165K-T3ML-2.
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type OMRON A165K-T3ML-2.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Conduit: Pg13.5.
Applicable cable: Cabtire cable.
Inner diameter (D)of seal rubber: 9.6 mm.
External diameter of cable: Min, 7 OMRON Key-type Selector Switch. 5 mm; Max, 9.5 mm.
Applicable model: WL@-G.
Connectors (SC Series).
Cabtire cables and flexible tubes with various diameters are used to,
connect machine tools and controllers with Limit Switches OMRON Key-type Selector Switch. To ensure,
the watertightness of the edges of the conduits, use an SC Connector,
that is suitable for the external diameter of cable and model of Limit Switch. Classification: Momentary operation.
Shape of Operation Unit: 40 dia OMRON Key-type Selector Switch.
Output: 2.
Operation Unit color: White (-WW) A165K-T3ML-2.
Long Service Life with Built-in Z-series.
Basic Switch.
Using a Basic Switch enables direct switching of large-capacity loads.
Shock-absorbing construction of Operation Unit protects the Switch.
Drip-proof Pushbutton consstruction enables use in locations subject to,
splashing water and oil and scattering dust OMRON A165K-T3ML-2.
Pushbuttons are available in three shapes and six colors.
...More relevant models >>>>
Last one: OMRON Key-type Selector Switch A165K-T3MR-2
next one: OMRON Key-type Selector Switch A165K-T3M-2
Related download