A3SJ-90D1-05EG OMRON A3SJ-90D1-05EG Lighted Pushbutton Switch

OMRON Lighted Pushbutton SwitchA3SJ-90D1-05EG

A3SJ-90D1-05EG Introduce | A3SJ-90D1-05EG Catalog/Manual/Instructions/Software download

Brand: OMRON
Name: Lighted Pushbutton Switch
Model: A3SJ-90D1-05EG
Contact type: Standard load (250 VAC, 2 A; 125 VDC 0.4 A).
Operation: Alternate operation (Self-holding).
Output: DPDT.
Lighting: LED, 5 VDC.
Operation Unit color symbol: Enter the desired color symbol for the,
Pushbutton in @ R (Red); Y (Yellow); G (Green); A (Blue); W (White).
Pushbutton Switch Series with.
Square 40-mm Body.
Combines miniature design with distinct but soft sense of operation.
Easy panel mounting from the front and simple lamp replacement.
without tools.

Actuator: Roller lever: R38.
Item: Basic.
Connector shape: Threaded (M12).
Built-in switch type: General-purpose.
Voltage: AC.
Wiring locations: NO only 2 core.
Connector pin No: NO 3 4 .
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches OMRON A3SJ-90D1-05EG A3SJ-90D1-05EG
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC OMRON A3SJ-90D1-05EG.
Contact your OMRON representative for information on approved models. Separate Construction with Cylindrical.
16-dia. Body.
Short mounting depth, less than 28.5 mm below panel.
Wide range of switching capacity from standard to microload.
Oil-resistant IP65 models. Water Leak Alarm.
Flexible Setup according to Water Quality,
and Surrounding Wiring Conditions.
The operating resistance has a variable sensitivity from 0 to,
50 kΩ, so the best set values can be made according to the pre,
dicted water leakage, degree of overflow, water quality, or sur,
rounding wiring conditions OMRON A3SJ-90D1-05EG.
The power supplied to the Sensing Band is 24 VAC, so opera,
tion is stable because there is no electrode deterioration from,
electrical corrosion OMRON Lighted Pushbutton Switch.
A contact signal output enables monitoring from remote loca,
tions OMRON Lighted Pushbutton Switch. Appearance: Round/Full-guard type LED lighting,
(without Voltage Reduction Unit) A22L-G.
Output: SPST-NC.
Lighting: LED.
Operating voltage: 24 VAC/VDC.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue) OMRON Lighted Pushbutton Switch.
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removinng the Switch Unit A3SJ-90D1-05EG.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounteed using either open-type (fork-type) or closed-type OMRON A3SJ-90D1-05EG.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).

...More relevant models >>>>