CA6-EXMCNRS11P-01 Proface CA6-EXMCNRS11P-01 Terminal connector (11 pin) for EX module

Touch screen anti ultraviolet protective film (1 pieces).Used to output the image signal from the host computer to GPStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface CA6-EXMCNRS11P-01. (1)Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)SD memory card (4GB, MLC, CLASS4) CA6-EXMCNRS11P-01Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. 15 inches, replaced by a host of backlight (1) Proface CA6-EXMCNRS11P-01. Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B).Disposable battery (1 blocks) for backing up clock data.10.4 inches and above, used to connect the power cord (5 / set).Used in a variety of host and man-machine interface for RS-232C connectionLT fasteners installed on the control panel (4 / set)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface CA6-EXMCNRS11P-01. Touch screen anti ultraviolet protective film (1 pieces).256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface Terminal connector (11 pin) for EX module. 128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface Terminal connector (11 pin) for EX module. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)A veneer, for the GP4000 series back loading models of full flush (white, 1)Apply to GLC-2600/2500LT4000M (module type analog), PNP output, DC24V (host) Proface Terminal connector (11 pin) for EX module. 1GB, for the implementationn of the picture save, log and data backup and other data management operations, such as compression flash memory card CA6-EXMCNRS11P-01. Slave station module for connecting support for CANopen10.4 inch screen protective cover (1 pieces)7.5 iinches, GP installed to the hard panel to provide dust and moisture proof function Proface CA6-EXMCNRS11P-01. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).