CA8-USBATALL-01 Proface USB cable fastener (1 interface) Proface CA8-USBATALL-01

Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).Used to output the image signal from the host computer to GPThe main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail Proface CA8-USBATALL-01 CA8-USBATALL-01 Suitable for LT4000M/GP4000M series modules, 3.5 inch.10.4 inches (TFT), replace the backlight (2 / set)Converting 2 analog signals into digital signalsCOM1 interface with the cable for direct connection to the CPU series PLC QTo prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)1-0 DVI standard (DVI-D 24 pin convex connector)5 Proface CA8-USBATALL-01. 7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)USB cable to prevent disconnection of the fastening clip (5 / set)GP4000 series back mounted model of waterproof rubber gasket. (1)Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communication3 Proface CA8-USBATALL-01. 4 Inch Touch Screen anti UV protective film (1 pieces).Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. Used for surface protection of man-machine interface from oil and chemical pollution (5 / set) Proface USB cable fastener (1 interface). USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set) Proface USB cable fastener (1 interface). When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Cable for connecting GP3000 to various modulesUsed to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block Proface USB cable fastener (1 interface). Engineering documents created by the LT interface to download images and logic proggramming software through the USB interface CA8-USBATALL-01. 7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeDisposable film (5 sheets / sets) for protecting screen against contammination of human computer interface Proface CA8-USBATALL-01. With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)