CQM1-OD216 Max switch-ing capacity: 05 A at 24 V DC OMRON CQM1-OD216 Transistor Output Module

Applicable CPU Units: CQM1H-CPU51/61.
Connection location and number of Units: One Unit only.The Unit must be connected between the Power Supply Unit and the CPU Unit.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 170 g max.Specification: Platinum resistance thermometer input (Pt100, JPt100),
heater burnout alarm,
manual operation,
ON/OFF or advanced PID control,
transistor (PNP) output, 2 loops OMRON CQM1-OD216 CQM1-OD216 Number of outputs: 32 pts.
Max. switch-ing capacity: 16 mA at 4.5 V DC to 100 mA at 26.4 V.
External connector: Connector.
Weight: 180 g max.Expands G730 output capacity of G730 remote master ; adds 32 or 16 outputs, DIP switch selected.Applicable CPU Units: CQM1H-CPU51/61.
Mounting locations and number of Boards: 1 Board can be mounted in either slot 1 or slot 2 OMRON CQM1-OD216.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 60 g max.Number of outputs: 8 pts.
Input Voltage: 250 VAC, 24 VAC.
Max Switching Current: 2 Amps.
Common Type: Independent.Analog inputs: 4 points.Number of analog inputs: 4 inputs.
Number of analog outputs: 2 outputs.
Input signal ranges: –10 to 10 V, 0 to 10 V, 0 to 5 V OMRON CQM1-OD216.
Output signal ranges: –10 to 10 V.Number of inputs: 8 pts.
Input Voltage: 100 to 120V DC.
Input Current: 5 mA.Number of outputs: 16 pts.
Max. switch-ing capacity: 50 mA at 4.5 V DC to 300 mA at 26.4 V.
External connector: Terminal block OMRON Transistor Output Module.
Weight: 180 g max.Specifications: Without clock (see below).Connects CQM1H to G730 SYSMAC BUS remote I/O
modules; max. 64 I/O (32 or 16 inputs or outputs, DIP switch selectable)
Number of I/O points per Master: 128
Communications cycle time: 187 OMRON Transistor Output Module. 5 kbps
Max. transmission distance: 200 m
One master and two expansions allowed per systemNumber of outputs: 6 pts.
Max. switch-ing capacity: 0.4 A at 100 to 240 V AC.
External connector: Terminal block OMRON Transistor Output Module.
Weight: 240 g max.Peripheral port to RS-422 conversion cable (length: 0.2 m).Description : Connects peripheral port to RS232C computer port (Use with CS1W-CN114).Number of outputs: 8 pts.
Max. switch-ing capacity: 00 CQM1-OD216. 4 A at 100 to 240 V AC.
External connector: Terminal block.
Weight: 240 g max.Connecting I/O control module and interface module.
Cable length: 0.3 m.Applicable CPU Units: CQM1H-CPU51/61.
Mounting locations/No. of Boards: One iin Inner Board slot 2 (right slot) OMRON CQM1-OD216.
Pulse inputs: 4 inputs.
Pulse outputs: 2 outputs.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.