Lock method: Mechanical lock.
Conduit size: G1/2.
Voltage for solenoid: 24 VDC.
With LED indicator 1NC/1NO+ 1NC (Slow-action).
Release Protective Cover Locks Using.
Controller Signals or Pushbutton.
Switches after the Cutting Tool Stops.
Moving Due to Inertia.
A mechanical lock is applied automatically when the Operation.
Key is inserted. A high level of safety is achieved using a,
applied to the solenoid.
Conforms to EN (TÜV) standards corresponding to the CE marking.
Certified by UL, CSA and CCC standards.
(NC contacts only) when the protective cover is opened.
on the Switch.
door in the case of a power failure.
degree of protection satisfying IP67, UL, and CSA TYPE6P, 13.
Equipped with a horizontal and vertical conduit opening.
those using an adjustable Operation Key for a swinging door are available.
to allow the Operation Key to be inserted from four directions.
Dimensions: A, 500mm; B, 1500mm.
Model: Yellow.
Safety outputs: SPDT-NO.
Auxiliary outputs: SPDT-NC.
Rated voltage: 24 VDC.
Terminal block type: Screw terminals.
New Safety Mat That Is Easy to.
Install and Maintain.
Simple connection allows multiple mats to be joined together.
A wide variety of mat sizes are available OMRON D4BL-2CRA-A.
Obtained EN1760-1 and EN ISO13849-1 (PLd/Safety.
Category 3) certification
D4BL-2CRA-A
Complies with North American safety standards,
including ANSI/RIA15.06-1999. Actuator: Roller lever (resin lever, resin roller).
Conduit size: 1-conduit; M12 connector.
Built-in switch mechanism: 1NC/1NO MBB(Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards OMRON D4BL-2CRA-A.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only) OMRON D4BL-2CRA-A.
Certified standards: UL, EN (TÜV), and CCC. Actuator: Fork lever lock (left operation).
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 2NC/1NO MBB (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards OMRON Guard Lock Safety-door Switch.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available OMRON Guard Lock Safety-door Switch. )
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only) OMRON Guard Lock Safety-door Switch.
Certified standards: UL, EN (TÜV), and CCC. Number of beams: 14.
Protective height: 305mm.
Model: PNP output.
Basic Type with a combination of.
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Mutiing Key Cap D4BL-2CRA-A.
Comes standard with interlock and auxiliary output functions. Number of beams: 23.
Protective height: 570mm.
Model: NPN output.
Basic Type with a combination of.
performance and functionality.
Up to three sets off series-connected sensors OMRON D4BL-2CRA-A.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions.