LK Automation Limited
Home >> Products >> OMRON >> Security products >> Safety door switch >> D4JL-4NFA-D5 OMRON D4JL-4NFA-D5

D4JL-4NFA-D5 OMRON D4JL-4NFA-D5

Brand: OMRON
Name: Guard Lock Safety-door Switch/Slide key
Model: D4JL-4NFA-D5
Release key type: Special release key.
Indicator: Orange.
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 2NC/1NO+2NC/1NO.
Conduit opening: M20.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection.

Number of beams: 10.
Protective height: 225mm.
Model: PNP output.
Basic Type with a combination of.
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions OMRON D4JL-4NFA-D5. Actuator: Roller lever (resin lever, resin roller).
Conduit size: 1-conduit; M12 connector D4JL-4NFA-D5
Built-in switch mechanism: 2NC (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement OMRON D4JL-4NFA-D5.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Dimensions: A, 750mm; B, 500mm.
Model: Yellow.
Safety outputs: SPDT-NO.
Auxiliary outputs: SPDT-NC OMRON D4JL-4NFA-D5.
Rated voltage: 24 VDC.
Terminal block type: Screw terminals.
New Safety Mat That Is Easy to.
Install and Maintain.
Simple connection allows multiple mats to be joined together.
A wide variety of mat sizes are available.
Obtained EN1760-1 and EN ISO13849-1 (PLd/Safety.
Category 3) certification OMRON Guard Lock Safety-door Switch/Slide key.
Complies with North American safety standards,
including ANSI/RIA15.06-1999. Actuator: Adjustable roller lever, form lock (metal lever, resin roller) OMRON Guard Lock Safety-door Switch/Slide key.
Conduit size: 2-conduit; M20.
Built-in switch mechanism: 1NC/1NO (Slow-action).
A Series of Pull-reset Models Now.
Available.
Lineup includes three contact models with 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC OMRON Guard Lock Safety-door Switch/Slide key.
M12-connector models are available, saving on labor and,

simplifying replacement D4JL-4NFA-D5.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC. OMRON D4JL-4NFA-D5. Economic safety limit switch.
The standard gold plated contacts ensure high reliability of the contact.
Can be used for standard load and small load.


...More relevant models >>>>