Home
>> Products
>> OMRON
>> Security products
>> Safety door switch
>> D4JL Series/D4JL-SK40 Series OMRON Guard Lock Safety-door Switch/Slide key D4JL Series/D4JL-SK40 Series
D4JL Series/D4JL-SK40 Series OMRON Guard Lock Safety-door Switch/Slide key D4JL Series/D4JL-SK40 Series
D4JL Series/D4JL-SK40 Series Introduce |
D4JL Series/D4JL-SK40 Series Model |
Catalog/Manual/Instructions/Software download
Catalog/Manual/Instructions/Software download
Brand:
OMRON
Name: Guard Lock Safety-door Switch/Slide key
Model: D4JL Series/D4JL-SK40 Series
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection.
...More relevant models >>>>
Name: Guard Lock Safety-door Switch/Slide key
Model: D4JL Series/D4JL-SK40 Series
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection.
Appearance: 40-dia. head Push-lock Turn-reset without Voltage Reduction Unit A22E.
Operating: Contact configuration, 1NC; Lighting, LED; Rated voltage, 24 VAC/VDC.
Push-lock turn-reset system.
Color of cap: Red.
Install in 22-dia. or 25-dia. Panel Cutout.
Direct opening mechanism to open the circuit when the contact welds OMRON D4JL Series/D4JL-SK40 Series.
Safety lock mechanism prevents operating errors D4JL Series/D4JL-SK40 Series
Easy mounting and removal of Switch Blocks using a lever.
Mount three Switch Units in series to improve wiring efficiency,
(with non-lighted Switch Units, three Units can be mounted for,
multiple contacts).
Finger protection mechanism on Switch Unit provided as a,
standard feature.
Install using either round, or forked crimp terminals OMRON D4JL Series/D4JL-SK40 Series.
Oil-resistant to IP65 (non-lighted models)/IP65 (lighted models),
A lock plate is provided as a standard feature to ensure that the,
control box and switch are not easily separated. Actuator: One-way roller arm lever (horizontal).
Conduit size: 1-conduit; M12 connector.
Built-in switch mechanism: 2NC (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards OMRON D4JL Series/D4JL-SK40 Series.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement OMRON Guard Lock Safety-door Switch/Slide key.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads OMRON Guard Lock Safety-door Switch/Slide key.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Number of beams: 64.
Protective height: 1,310mm.
Model: PNP.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO OMRON Guard Lock Safety-door Switch/Slide key.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Type of drive rod: plunger type.
Conduit size: single catheter type, M20.
Built in switch structure: slow motion (1NC).
SSafety limit switch in accordance with global standard EN 50047 D4JL Series/D4JL-SK40 Series.
The contact constitutes a complete variety, there is a single point of specification (1NC) and double contact specifications (1NC/1NO, 2NC).
Forcedd open action structure OMRON D4JL Series/D4JL-SK40 Series.
The slow moving contact structure is adopted to ensure that the contact distance is 4mm.
Elevator and escalator can be used.
Operating: Contact configuration, 1NC; Lighting, LED; Rated voltage, 24 VAC/VDC.
Push-lock turn-reset system.
Color of cap: Red.
Install in 22-dia. or 25-dia. Panel Cutout.
Direct opening mechanism to open the circuit when the contact welds OMRON D4JL Series/D4JL-SK40 Series.
Safety lock mechanism prevents operating errors D4JL Series/D4JL-SK40 Series
Easy mounting and removal of Switch Blocks using a lever.
Mount three Switch Units in series to improve wiring efficiency,
(with non-lighted Switch Units, three Units can be mounted for,
multiple contacts).
Finger protection mechanism on Switch Unit provided as a,
standard feature.
Install using either round, or forked crimp terminals OMRON D4JL Series/D4JL-SK40 Series.
Oil-resistant to IP65 (non-lighted models)/IP65 (lighted models),
A lock plate is provided as a standard feature to ensure that the,
control box and switch are not easily separated. Actuator: One-way roller arm lever (horizontal).
Conduit size: 1-conduit; M12 connector.
Built-in switch mechanism: 2NC (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards OMRON D4JL Series/D4JL-SK40 Series.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement OMRON Guard Lock Safety-door Switch/Slide key.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads OMRON Guard Lock Safety-door Switch/Slide key.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Number of beams: 64.
Protective height: 1,310mm.
Model: PNP.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO OMRON Guard Lock Safety-door Switch/Slide key.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Type of drive rod: plunger type.
Conduit size: single catheter type, M20.
Built in switch structure: slow motion (1NC).
SSafety limit switch in accordance with global standard EN 50047 D4JL Series/D4JL-SK40 Series.
The contact constitutes a complete variety, there is a single point of specification (1NC) and double contact specifications (1NC/1NO, 2NC).
Forcedd open action structure OMRON D4JL Series/D4JL-SK40 Series.
The slow moving contact structure is adopted to ensure that the contact distance is 4mm.
Elevator and escalator can be used.
...More relevant models >>>>
Last one: OMRON Guard Lock Safety-door Switch D4NL-4HFG-B-SJ
next one: OMRON Guard Lock Safety-door Switch/Slide key D4JL-2NFA-C5
Related download
Related model