Home
>> Products
>> MITSUBISHI
>> FX series PLC
>> FX all modules and accessories
>> FX all accessories
>> E-GM-200CAB MITSUBISHI E-GM-200CAB
E-GM-200CAB MITSUBISHI E-GM-200CAB
Brand:
MITSUBISHI
Name: Cable for connecting servo
Model: E-GM-200CAB
Length: 2m.
Specification: universal connection cable.
...More relevant models >>>>
Name: Cable for connecting servo
Model: E-GM-200CAB
Length: 2m.
Specification: universal connection cable.
Max input / output points: 20 points.
Power supply voltage: DC24V.
Input points: 12 points.
Output points: 8 points.
Output type: relay.
Power consumption (W): 20.
Weight (kg):0.4.
Size (WxHxD) mm:75x90x75.
Positioning and pulse output functions: a PLC cell can output 2 point 100KHz pulses at the same time MITSUBISHI E-GM-200CAB.
PLC is equipped with 7 special positioning instructions,
Including zero return, absolute or relative address expression and special pulse output control E-GM-200CAB
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain MITSUBISHI E-GM-200CAB.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication MITSUBISHI E-GM-200CAB. Function expansion board for RS-485 communication.Length: 55mm.
Function: connect GM-FX.
Corresponding models: FX2N-10GM, FX2N-20GM. Max input / output points: 14 points.
Supply voltage: 100 - 240VAC.
Input points: 8 points.
Output points: 6 points MITSUBISHI Cable for connecting servo.
Output type: relay.
Power consumption (W): 19.
Weight (kg):0.3.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types MITSUBISHI Cable for connecting servo.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain MITSUBISHI Cable for connecting servo.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor E-GM-200CAB.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC bboard, can achieve RS232, RS485, RS422 communication MITSUBISHI E-GM-200CAB. Function: extended power unit.
DC5V power supply capacity: 1A.
DC24V power supply capacity: 0.3A.
Power supply voltage: DC24V.
Input points: 12 points.
Output points: 8 points.
Output type: relay.
Power consumption (W): 20.
Weight (kg):0.4.
Size (WxHxD) mm:75x90x75.
Positioning and pulse output functions: a PLC cell can output 2 point 100KHz pulses at the same time MITSUBISHI E-GM-200CAB.
PLC is equipped with 7 special positioning instructions,
Including zero return, absolute or relative address expression and special pulse output control E-GM-200CAB
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain MITSUBISHI E-GM-200CAB.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication MITSUBISHI E-GM-200CAB. Function expansion board for RS-485 communication.Length: 55mm.
Function: connect GM-FX.
Corresponding models: FX2N-10GM, FX2N-20GM. Max input / output points: 14 points.
Supply voltage: 100 - 240VAC.
Input points: 8 points.
Output points: 6 points MITSUBISHI Cable for connecting servo.
Output type: relay.
Power consumption (W): 19.
Weight (kg):0.3.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types MITSUBISHI Cable for connecting servo.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain MITSUBISHI Cable for connecting servo.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor E-GM-200CAB.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC bboard, can achieve RS232, RS485, RS422 communication MITSUBISHI E-GM-200CAB. Function: extended power unit.
DC5V power supply capacity: 1A.
DC24V power supply capacity: 0.3A.
...More relevant models >>>>
Last one: MITSUBISHI Cable for connecting servo E-GMC-200CAB
next one: MITSUBISHI Connecting cable FX-232CAB-1
Related download