LK Automation Limited
Home >> Products >> OMRON >> Sensor >> Proximity sensor >> Cylindrical proximity sensor >> E2A-M12LN08-M1-B1 Cylindrical Proximity Sensor OMRON E2A-M12LN08-M1-B1 Sensing distance: 80 mm 

E2A-M12LN08-M1-B1 Cylindrical Proximity Sensor OMRON E2A-M12LN08-M1-B1 Sensing distance: 80 mm 

Brand: OMRON
Name: Cylindrical Proximity Sensor
Model: E2A-M12LN08-M1-B1
Size: M12, Non-shielded.
Sensing distance: 8.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 56 (70).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.

Fitting materials: Iron, zinc plating.
Count: 2.
Accessories: Description, Phillips screws M3 × 10 Nuts M3;
Material, Iron, zinc plating Iron, zinc plating;
Count, 4, 4.
Applicable sensor (mounting pitch on sensor side): E32-T16P (19)E32-T16PR (19).
Page: Dimensions, 10. Size: M30 (brass), two - fold range, non - shielded type OMRON E2A-M12LN08-M1-B1.
Detection range: 30mm.
Connection mode: lead type (cable length is 2M and 5m two) E2A-M12LN08-M1-B1
Thread length: long thread type.
Output type: PNP.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor OMRON E2A-M12LN08-M1-B1.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site.
Simulation test was carried out in the environment of high oil mist concentration. Connection method: Pre-wired connector OMRON E2A-M12LN08-M1-B1.
Cable length: 0.5 m.
Sensing distance: 100 ± 35 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece OMRON Cylindrical Proximity Sensor.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.Appearance: Cylindrical (flat surface installation) OMRON Cylindrical Proximity Sensor.
Sensing distance: 100 mm.
Output configuration: Current output.
Detection Distance of 100 mm for.
Both Ferrous and Non-ferrous.
Substances.
Ultra long-distance detection of 100 mm for both ferrous and,
non-ferrous substances.
Models also available for use under water OMRON Cylindrical Proximity Sensor. Appearance: Standard.
Sensing method: Throughbeam type(with slot).
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: No incident light.
Model: PNP output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity.
Series includes models that enable switching betweenn,
dark-ON and light-ON operation E2A-M12LN08-M1-B1.
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for ddark-ON,
operation are also available OMRON E2A-M12LN08-M1-B1.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature.


...More relevant models >>>>