Home
>> Products
>> OMRON
>> Sensor
>> Proximity sensor
>> Cylindrical proximity sensor
>> E2A-M12LS04-M1-B1 OMRON E2A-M12LS04-M1-B1
E2A-M12LS04-M1-B1 OMRON E2A-M12LS04-M1-B1
Brand:
OMRON
Name: Cylindrical Proximity Sensor
Model: E2A-M12LS04-M1-B1
Size: M12, Shielded.
Sensing distance: 4.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 56 (70).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.
...More relevant models >>>>
Name: Cylindrical Proximity Sensor
Model: E2A-M12LS04-M1-B1
Size: M12, Shielded.
Sensing distance: 4.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 56 (70).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.
Model: Shielded, M18.
Sensing distance: 5 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NC.
Proximity Sensor with Resin Case,
with Superb Water Resistance.
IP68 protection.
Mutual interference prevention with models with different,
frequencies is also available. Fitting materials: Stainless steel(SUS304) OMRON E2A-M12LS04-M1-B1.
Count: 1 .
Accessories: Description, Holder/bracket, Shaft (brace),
Bolt with hexagonal hole, Nut, Phillips screw, Slotted/Phillips screws;
Material, PBT (polybutylene tereph thalate), Stainless steel (SUS304),
Stainless steel (SUSXM7), Stainless steel (SUS304),
Stainless steel (SUSXM7), Stainless steel (SUS304);
Count, 1, 1, 1, 1, 1, 2 E2A-M12LS04-M1-B1
Applicable sensor (mounting pitch on sensor side): E3Z (25 OMRON E2A-M12LS04-M1-B1. 4),
E3S-R6@/R8@ (20) , E39-R3.
Page: Dimensions, 14. Detection method: Regression reflection type with MSR function.
Connection: socket type (M12).
Detection range: red light 4m.
Output mode: PNP output. Sensing method: Through-beam Sensors.
Appearance: Vertical.
Connection method: Connector(M12).
Sensing distance: 7 m.
Functions: --.
Model: PNP output OMRON E2A-M12LS04-M1-B1.
Ordering Information.
Built-in Amplifier Photoelectric Sensors. Appearance: M18.
Sensing distance: 14 mm.
Connection method: M12 Pre-wired Smartclick Connector Models (0.3m).
Cable specifications: PVC (oil-resistant).
Polarity: Yes.
Operation mode : NO OMRON Cylindrical Proximity Sensor.
Pin arrangement: 1: +V, 4: 0 V.
Applicable connector code: G.
Your Search for Proximity Sensors.
Starts with the World-leading OMRON Cylindrical Proximity Sensor.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals.
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil OMRON Cylindrical Proximity Sensor.
Useful to help prevent disconnection.
Cable protector provided as a standard feature. Appearance: Separate type.
Optical system: Through-beam.
Measuring width: 28mm.
Sensing distance: 0 to 500mm.
Resolution: 10µm.
Output type: PNP.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being confined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome E2A-M12LS04-M1-B1. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at orr whichever way it is inserted OMRON E2A-M12LS04-M1-B1.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area.
Sensing distance: 5 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NC.
Proximity Sensor with Resin Case,
with Superb Water Resistance.
IP68 protection.
Mutual interference prevention with models with different,
frequencies is also available. Fitting materials: Stainless steel(SUS304) OMRON E2A-M12LS04-M1-B1.
Count: 1 .
Accessories: Description, Holder/bracket, Shaft (brace),
Bolt with hexagonal hole, Nut, Phillips screw, Slotted/Phillips screws;
Material, PBT (polybutylene tereph thalate), Stainless steel (SUS304),
Stainless steel (SUSXM7), Stainless steel (SUS304),
Stainless steel (SUSXM7), Stainless steel (SUS304);
Count, 1, 1, 1, 1, 1, 2 E2A-M12LS04-M1-B1
Applicable sensor (mounting pitch on sensor side): E3Z (25 OMRON E2A-M12LS04-M1-B1. 4),
E3S-R6@/R8@ (20) , E39-R3.
Page: Dimensions, 14. Detection method: Regression reflection type with MSR function.
Connection: socket type (M12).
Detection range: red light 4m.
Output mode: PNP output. Sensing method: Through-beam Sensors.
Appearance: Vertical.
Connection method: Connector(M12).
Sensing distance: 7 m.
Functions: --.
Model: PNP output OMRON E2A-M12LS04-M1-B1.
Ordering Information.
Built-in Amplifier Photoelectric Sensors. Appearance: M18.
Sensing distance: 14 mm.
Connection method: M12 Pre-wired Smartclick Connector Models (0.3m).
Cable specifications: PVC (oil-resistant).
Polarity: Yes.
Operation mode : NO OMRON Cylindrical Proximity Sensor.
Pin arrangement: 1: +V, 4: 0 V.
Applicable connector code: G.
Your Search for Proximity Sensors.
Starts with the World-leading OMRON Cylindrical Proximity Sensor.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals.
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil OMRON Cylindrical Proximity Sensor.
Useful to help prevent disconnection.
Cable protector provided as a standard feature. Appearance: Separate type.
Optical system: Through-beam.
Measuring width: 28mm.
Sensing distance: 0 to 500mm.
Resolution: 10µm.
Output type: PNP.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being confined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome E2A-M12LS04-M1-B1. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at orr whichever way it is inserted OMRON E2A-M12LS04-M1-B1.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area.
...More relevant models >>>>
Last one: OMRON Cylindrical Proximity Sensor E2A-M12KS04-M1-C1
next one: OMRON Cylindrical Proximity Sensor E2A-M12LS04-M1-C1
Related download