E2C-JC4A 2M Self-diagnostic output: -- OMRON E2C-JC4A 2M Separate Amplifier Proximity Sensor with Adjustment Potentiometer

Fitting materials: Iron, zinc plating.
Count: 1.
Accessories: Description, Phillips screws M4 × 25,
(with spring and plain washers) Nuts M4 ;
Material, Iron, zinc plating; Count, 2 .
Applicable sensor (mounting pitch on sensor side): E3JK.
Page: Dimensions, 5.
Sensing method: Retroreflective type OMRON E2C-JC4A 2M.
Sensing distance: 200 mm.
Output type: NPN output.
Output configuration: Light-ON E2C-JC4A 2M
Photomicrosensor with light,
modulation for reduced external light,
interference.
Easy adjustment and optical axis monitoring with a light indicator.
Wide operating voltage range: 5 to 24 VDC.
Supports connection with Programmable Controllers (PLCs).
Easy-to-wire connectors assure easy maintenance. Detection mode: diffuse reflection type OMRON E2C-JC4A 2M.
Connection: socket type (M12).
Detection range: red light 1mmmm.
Output mode: NPN output. Adjust knob can be used 8 rotary universal micro adjustment.
Is the traditional product detection distance of the 2.
To cope with variable knob.
Ultra high speed pulse response of 20 s lights.
Detection of subtle color difference with green light source.Sensing method: Distance settable OMRON E2C-JC4A 2M.
Connection method: Pre-wired (2 m).
Model: NPN output.
Distance-settable Sensor Unaffected,
by Workpiece Color and Background.
Distance-settable triangulation model unaffected by color.
Simple positioning settings using a clear LED spot.
(E3Z-LS@3/LS@8).
Detect minute steps. Appearance: Shielded, M30.
Sensing distance: 15 mm.
Model: NO.
Long-distance Proximity Sensor OMRON Separate Amplifier Proximity Sensor with Adjustment Potentiometer.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions OMRON Separate Amplifier Proximity Sensor with Adjustment Potentiometer.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature. Appearance: Close-mounting.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles) OMRON Separate Amplifier Proximity Sensor with Adjustment Potentiometer.
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: PNP output.
Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and darrk-ON E2C-JC4A 2M.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations OMRON E2C-JC4A 2M.
Connector with lock that mates with commercially available,
connectors.