E2K-X4MF2 2M OMRON Cylindrical Proximity Sensor OMRON E2K-X4MF2 2M

Fitting materials: Iron, zinc plating.
Count: 1.
Accessories: Description, Slotted/Phillips screws, M3 × 12(with spring washers);
Material, Iron, zinc plating; Count, 2 .
Applicable sensor (mounting pitch on sensor side): E3C-S50 (8).
Page: Dimensions, 5.
Connection method: Pre-wired.
Cable length: 2 m OMRON E2K-X4MF2 2M.
Sensing distance: 600 ± 400 mm.
Model: NPN output.
A CMOS Laser Sensor That’s E2K-X4MF2 2M
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Size: M8(Stainless steel)(See note 2.); Single; Unshielded OMRON E2K-X4MF2 2M.
Sensing distance: 2 mm.
Connecting method (See note 1.): M8 Connector (3-pin).
Body length: Long.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications. Output configuration: DC switching NPN (normally open or closed selectable).
Sensing method: Through-beam.
Sensing distance: 50 cm.
Capable of Setting the Sensing Range.
Using an Ultrasonic Beam OMRON E2K-X4MF2 2M.
Ensures the stable detection of a variety of objects,
regardless of the color, transparency, or material.
(metallic or non-metallic) of the objects.
Limits the ultrasonic beam width to 8°, thus,
detecting minute objects as small as 2 x 2 cm.
Detects objects smoothly while largely suppressing,
interference from background objects OMRON Cylindrical Proximity Sensor.
Sealed to resist dust and dirt and emits ultrasonic,
waves at a frequency of approximately 200 kHz,
thus providing high immunity from impact and,
environmental noise OMRON Cylindrical Proximity Sensor. Size: M8(Stainless steel)(See note 2.); Double; Unshielded.
Sensing distance: 4 mm.
Connecting method (See note 1.): Pre-wired.
Body length: Short.
Output configuration: PNP.
Operation mode NO OMRON Cylindrical Proximity Sensor.
A new generatiion in global applications E2K-X4MF2 2M. Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 2-wire, (1)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation eeven with aluminum or iron chips sticking,
to the Sensor OMRON E2K-X4MF2 2M.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available.